2020 Chevrolet ZR2 Bison 2.8L diesel from GM factory + full AEV Upfit components, 24.8k miles, turnkey overland vehicle $75k optional JB Evasion $4k

[jtljohnson]

Listing a 2020 Chevrolet ZR2 Bison from GM factory. Includes 100% upfit with all AEV components as well as hand picked overland components as listed below. Total upgrades were $35,284 parts only. Serious interest only offered at $75k and JB Evasion (black) very lightly used 4 total nights for $4,000.

Pictures show it with 3 front runner cross bars with flat mounting system. The truck will come with front runner bars, rhino rack and the RLD designs rack. It gives you options and you can l

eave one mounted to the James Baroud tent if you choose the tent option +$4k.

Table below shows original costs, all upgrades are parts cost only except dealer installed GM suspension components and Nitro 4.10 gears done at Nitro shop.

 

[jtljohnson]

Also location is Seattle, WA

 

[plainjaneFJC]

Odometer?

 

[jtljohnson]

24,800 miles

 

[jtljohnson]

Odometer?

24,800 miles

 

[jtljohnson]

I should add this has a Duramax tuner five pack tune and calibration for the 35s so speedo is accurate and cruise works as it should. It as a $1.200 upgrade not listed above.

One another note, is the truck is completely clean, no damage, no mechanical issues.

 

[Zombie2hundo]

No spare or compressor?

 

[jtljohnson]

There is matching 35 spare. Also twin ARB mounted under hood

 

[jtljohnson]

I keep forgetting upgrades I did not mention. This has the 2" Deaver Expedition springs from Colorado Canyon Enthusiasts with new u bolts and cut off bolt to clear fuel tank. Another $1,050 upgrade.

Also, the wheels come with the onyx AEV protection rings and all bolts. They were never installed, just the plastic threaded bolts that protect the holes and threads from mud. I like the look of them without the rings but if you like the look of bead lock wheels then you can have it.

Lastly wanted to be clear it comes with three racks you can choose from for your application. 1.) is a Rhino Pioneer platform that is flat mounted 2.) is the stainless RLD platform and cross bars that matches the canopy and 3.) are the road runner cross bars x 3 also flat mounted if you want the lightest weight option.

 

[jtljohnson]

I added my listing to EBAY Motors auction. Link below

https://ebayvehicle.com/app/5b8f Check out what I found on eBay Motors

 

[thejonchacon]

very nice build

 

[ramirezdan]

DM'd.

 

[Stoshu]

This still available?