StrongTower
New member
Located outside of Charlotte NC
This is my Bronco that made the Best Rigs of Overland Expo East 2022!
Here is the link to read about my Retro Inspired Bronco!
https://www.overlandexpo.com/compass/best-rigs-of-overland-expo-east-2022/
2022 Bronco 2-door Eruption Green Big Bend
-Original owner, ordered the day they launched the new Bronco in July of 2020. Waited until April of 2022 to arrive!
-12,700 miles (will go up as I am daily driving it) still under factory warranty til 2025 or 36k miles
-Sasquatch package
-2.7 V6 Turbo with 10 speed automatic
-back up camera
-Hard top
-6 accessory switches
-keyless entry
-keypad entry
-FORD locking center console
Current KBB Private Party value for Bronco stock is $59,823.00
Maintenance Records
Meticulously maintained!
-First oil service is scheduled from Ford at 10k miles. I have completed 2 full oil services before the first service was ever done.
-Vehicle was driven for the first 1500 miles under 4k rpms to properly break in motor.
-5/12/22 break in oil change done at 1521 miles, used LiquiMoly engine flush and added LiquiMoly Cera-Tec Ceramic internal engine coating, converted plastic oil drain plug to UPR Billet aluminum oil drain plug and used LiquiMoly full synthetic oil. Installed UPR dual valve Turbo Catch Can.
-10/21/22 oil change done at 7595 miles, using LiquiMoly Cera-Tec Ceramic internal engine coating and used LiquiMoly full synthetic oil.
-Unfortunately, it has never off-road. There is a personal reason/story for this and part of the reason for me selling that I will share privately with potential buyers.
Custom Aftermarket List with receipts Totaling $41,353.71 (lift and accessories were installed around 6k miles on the vehicle due to waiting for parts!)
-ARB Summit Front Brush guard
-Warn EVO 10 winch
-C4RS full synthetic winch line with Factor 55 Ultra Hook
-2 Baja Designs LP9 Pro lights on bumper
-2 Baja Designs Squadron SAE Amber lights in lower front bumper
-2 Baja Designs Sport A-Pillar mounted lights
-Rock Slide Engineering power side steps with Rock Slide Engineering Slider skid plates
-Upgraded all 6 speakers with new Focal Speakers
-67 Designs carbon fiber phone mount
-PPF sunshield on navigation/radio
-Midland MXT500 mounted on dash with Midland Ghost antenna on hood
-Installed VR Tuned ECU tuner to increase by 54hp and 100 ft lb of torque, currently getting 15-16 mpg around town on 38" tires with 384hp and 515lb of torque!
-React Bronco throttle pedal enhancer-New never installed
-Bronc Buster Stage III Heavy Duty one piece billet aluminum steering rack housing assembly
-Bronc Buster steering bushing upgrade
-Bronc Buster billet aluminum tie rod Buster Brace set
-Class 3 rear trailer hitch and trailer wiring
-Camburg Performance Uniball upper control arms
-Camburg tubular lower rear trailing arm kit
- Front complete KING adjustable long travel coil over kit with 26 different settings for ride control
- Rear complete KING adjustable long travel coil over kit with 26 different settings for ride control
-5 17” x 9” Black Rhino Prim Mirror Faced and Machined full beadlock wheels
-5 38” x 12.5” NITTO Ridge Grappler tires
-JCR Vanguard dual rear swing out rear bumper assembly
-JCR drivers side swing out adventure carrier with dual jerry can holder with 2 black jerry cans
-JCR passenger side swing out tire carrier with rear camera relocation kit
- 2 Baja Designs S1 work scene rear lights mounted in lower bumper as reverse lights
- ARB full under carriage armored skid plates
-JCR lower front control arm armored skid plates
-JCR armored rear lower shock skid plates
-Wet Okole custom made front full neoprene seat covers with pistol holsters custom made into both driver and passenger seats (with heated seat elements and switches that have not been installed) neoprene arm rest cover
-2 Paracord grab handles
-full set of rubber mats
-full set of carpet mats (new in the wrapper, never used)
-Custom 1969 inspired wood grain wrap on sides of the body- Can have removed or modified for buyer to either have just wood grain on the door or possibly have your logo placed there.
-Gearshades Bronco Mesh Top (New in the wrapper, never used)
-clear PPF on nose, a-pillars and windshield surround, both doors fully covered with PPF and then wood grain, rear quarter rock guards
Asking $83,000.00 OBO
This is my Bronco that made the Best Rigs of Overland Expo East 2022!
Here is the link to read about my Retro Inspired Bronco!
https://www.overlandexpo.com/compass/best-rigs-of-overland-expo-east-2022/
2022 Bronco 2-door Eruption Green Big Bend
-Original owner, ordered the day they launched the new Bronco in July of 2020. Waited until April of 2022 to arrive!
-12,700 miles (will go up as I am daily driving it) still under factory warranty til 2025 or 36k miles
-Sasquatch package
-2.7 V6 Turbo with 10 speed automatic
-back up camera
-Hard top
-6 accessory switches
-keyless entry
-keypad entry
-FORD locking center console
Current KBB Private Party value for Bronco stock is $59,823.00
Maintenance Records
Meticulously maintained!
-First oil service is scheduled from Ford at 10k miles. I have completed 2 full oil services before the first service was ever done.
-Vehicle was driven for the first 1500 miles under 4k rpms to properly break in motor.
-5/12/22 break in oil change done at 1521 miles, used LiquiMoly engine flush and added LiquiMoly Cera-Tec Ceramic internal engine coating, converted plastic oil drain plug to UPR Billet aluminum oil drain plug and used LiquiMoly full synthetic oil. Installed UPR dual valve Turbo Catch Can.
-10/21/22 oil change done at 7595 miles, using LiquiMoly Cera-Tec Ceramic internal engine coating and used LiquiMoly full synthetic oil.
-Unfortunately, it has never off-road. There is a personal reason/story for this and part of the reason for me selling that I will share privately with potential buyers.
Custom Aftermarket List with receipts Totaling $41,353.71 (lift and accessories were installed around 6k miles on the vehicle due to waiting for parts!)
-ARB Summit Front Brush guard
-Warn EVO 10 winch
-C4RS full synthetic winch line with Factor 55 Ultra Hook
-2 Baja Designs LP9 Pro lights on bumper
-2 Baja Designs Squadron SAE Amber lights in lower front bumper
-2 Baja Designs Sport A-Pillar mounted lights
-Rock Slide Engineering power side steps with Rock Slide Engineering Slider skid plates
-Upgraded all 6 speakers with new Focal Speakers
-67 Designs carbon fiber phone mount
-PPF sunshield on navigation/radio
-Midland MXT500 mounted on dash with Midland Ghost antenna on hood
-Installed VR Tuned ECU tuner to increase by 54hp and 100 ft lb of torque, currently getting 15-16 mpg around town on 38" tires with 384hp and 515lb of torque!
-React Bronco throttle pedal enhancer-New never installed
-Bronc Buster Stage III Heavy Duty one piece billet aluminum steering rack housing assembly
-Bronc Buster steering bushing upgrade
-Bronc Buster billet aluminum tie rod Buster Brace set
-Class 3 rear trailer hitch and trailer wiring
-Camburg Performance Uniball upper control arms
-Camburg tubular lower rear trailing arm kit
- Front complete KING adjustable long travel coil over kit with 26 different settings for ride control
- Rear complete KING adjustable long travel coil over kit with 26 different settings for ride control
-5 17” x 9” Black Rhino Prim Mirror Faced and Machined full beadlock wheels
-5 38” x 12.5” NITTO Ridge Grappler tires
-JCR Vanguard dual rear swing out rear bumper assembly
-JCR drivers side swing out adventure carrier with dual jerry can holder with 2 black jerry cans
-JCR passenger side swing out tire carrier with rear camera relocation kit
- 2 Baja Designs S1 work scene rear lights mounted in lower bumper as reverse lights
- ARB full under carriage armored skid plates
-JCR lower front control arm armored skid plates
-JCR armored rear lower shock skid plates
-Wet Okole custom made front full neoprene seat covers with pistol holsters custom made into both driver and passenger seats (with heated seat elements and switches that have not been installed) neoprene arm rest cover
-2 Paracord grab handles
-full set of rubber mats
-full set of carpet mats (new in the wrapper, never used)
-Custom 1969 inspired wood grain wrap on sides of the body- Can have removed or modified for buyer to either have just wood grain on the door or possibly have your logo placed there.
-Gearshades Bronco Mesh Top (New in the wrapper, never used)
-clear PPF on nose, a-pillars and windshield surround, both doors fully covered with PPF and then wood grain, rear quarter rock guards
Asking $83,000.00 OBO
Last edited:
