2022 Toyota Tacoma TRD OffRoad w Flatbed Tray and Canopy


New member
Hey everyone!
Just finished up this build. Ordered it new from my local Toyota dealer. Everything added has less than 500 miles on it. This is built for any adventure.
2022 Toyota Tacoma TRD Offroad w rear locker and A Trac
1,500 miles
Celestial Silver
6 Speed Manual
Factory installed LED headlights and fog lights
Front and rear windows tinted
2.5" lift with Icon RXT Full replacement rear springs set for 500lb constant weight and Eibach adjustable height coilovers
Freedom Offroad Upper Control Arms
285/70/17 BFG All Terrains with matching spare on the canopy
Professionally aligned by local offroad shop

Now the good stuff!

ALTRA Fabrication Flatbed Tray and Canopy
Canopy is removable with just 4 bolts to turn into just a flatbed if needed.
Flatbed and canopy are fully aluminum and powdercoated textured black

Flatbed includes
- Tapered mudguards w front infill panels
- Rear underboxes fully sealed with automotive rubber seals
- Trundle drawer under the truck that is sealed and pulls out 57" just shy of 5 feet
- Drawer and boxes are both lockable
- Reverse camera and fuel filler relocation
- LED taillights and License Plate light
- The rear bar of the flatbed sits above where the factory bumper was giving a massive increase in departure angle

Canopy includes
- Fully sealed doors with automotive rubber seals and lockable
- Gas strut assisted doors
- Fully framed inside
- Unistrut on roof, front, back, and floor for easy installation of drawers or anything you would like to hang
- Spare tire mounted to back with lockable rod
- Fold down ladder for easy roof access
- Lockable Jerry Can mount

I spent 4 years in Australia building trays and canopies. This is built to Aussie spec and built to take on the outback!

Located in Wilmington, NC

Thank you for looking. If you have any questions please feel free to ask.

Tacoma 1.jpgTacoma 2.jpgTacoma 4.jpgTacoma 5.jpgTacoma 6.jpgTacoma 7.jpgTacoma 8.jpgTacoma 9.jpgTacoma 10.jpgTacoma 11.jpg
Last edited:


Which engine does the Taco have?

Did you personally build the tray/canopy?

If you could send me a DM with more details I would appreciate it.


Can you shoot me an email at christian.simon@salem.edu? I am in Chapel Hill. I am interested in building a similar rig, but on a Tacoma Access Cab with 6 foot bed, and pop up bed in the rear. If you are interested in a project like that, I can come down to Wilmington some time so we can talk. I'd like to take a closer look at your rig, too. Thx Chris

Forum statistics

Latest member