My financial situation has changed, and I'm looking to sell my truck and camper, as a whole unit at this time, as the camper is custom to fit in the bed of the truck with the tailgate closed. Camper is located in Longmont Colorado until March 15th, when I will move it to Chattanooga Tennessee.
Everything is in like new condition, and was purchased new from factory four months ago, and has been covered ever since in storage. The camper has 90% of the powder coated aluminum interior installed; I have not installed the cabinet over the sink, or the final piece of the countertop, as that will be dependent on the buyer’s desires. Additionally, I have not installed the water tank seat at the front of the camper as water tank size will depend on the buyer.
The details:
Camper:
Everything is in like new condition, ready for adventures. It can fit an 8 foot bed with the tailgate closed or a 6.75 ft bed with the tailgate down.
There is zero wood in the camper. Bison is made with Lemker panels made of PET Gurit Kerdyn Pannels (not EPS), and are all made in America with aluminum powder coated extrusions. If you really look into panels, I believe these are very hard to beat and better than other panels out there. You can see the attached data on the panels, the strength is 5-10 times (depending on loading) greater than EPS panels. Additionally, all the interior is secured with adhesive, no screws penetrate the box.
$29,500 for the camper, located in Longmont CO. Can deliver for a fee.
Message or call at 72zero.62six.3352
mack.maier@gmail.com
Everything is in like new condition, and was purchased new from factory four months ago, and has been covered ever since in storage. The camper has 90% of the powder coated aluminum interior installed; I have not installed the cabinet over the sink, or the final piece of the countertop, as that will be dependent on the buyer’s desires. Additionally, I have not installed the water tank seat at the front of the camper as water tank size will depend on the buyer.
The details:
Camper:
- 2024 (picked up from factory in Oklahoma in July) Bison Overland Camper, dry weight around 950 lbs
- 4 windows added and Maxx Air fan in roof.
- Arctic Tern Euro door
- Interior build out kit added (I powder coated it Gray, comes raw aluminum from Bison). Kit is aluminum with bamboo doors and countertops.
- Interior foam for seating is currently being upholstered.
Everything is in like new condition, ready for adventures. It can fit an 8 foot bed with the tailgate closed or a 6.75 ft bed with the tailgate down.
There is zero wood in the camper. Bison is made with Lemker panels made of PET Gurit Kerdyn Pannels (not EPS), and are all made in America with aluminum powder coated extrusions. If you really look into panels, I believe these are very hard to beat and better than other panels out there. You can see the attached data on the panels, the strength is 5-10 times (depending on loading) greater than EPS panels. Additionally, all the interior is secured with adhesive, no screws penetrate the box.
$29,500 for the camper, located in Longmont CO. Can deliver for a fee.
Message or call at 72zero.62six.3352
mack.maier@gmail.com
Attachments
Last edited:
