2024 Bison Overland Camper $29,800

Mack M

Active member
Greetings,
IMG_2598.jpeg
IMG_2598.jpeg

My financial situation has changed, and I'm looking to sell my truck and camper, as a whole unit at this time, as the camper is custom to fit in the bed of the truck with the tailgate closed. Truck and camper are located in Longmont Colorado.

Everything is in like new condition, and was purchased new from factory four months ago, and has been covered ever since in storage. The camper has 90% of the powder coated aluminum interior installed; I have not installed the cabinet over the sink, or the final piece of the countertop, as that will be dependent on the buyer’s desires. Additionally, I have not installed the water tank seat at the front of the camper as water tank size will depend on the buyer.

The details:

Camper:

  • 2024 (picked up from factory in Oklahoma in July) Bison Overland Camper, dry weight around 950 lbs
  • 4 windows added and Maxx Air fan in roof.
  • Arctic Tern Euro door
  • Interior build out kit added (I powder coated it Gray, comes raw aluminum from Bison). Kit is aluminum with bamboo doors and countertops.
  • Interior foam for seating is currently being upholstered.

Everything is in like new condition, ready for adventures.


There is zero wood in the camper. Bison is made with Lemker panels made of PET Gurit Kerdyn Pannels (not EPS), and are all made in America with aluminum powder coated extrusions. If you really look into panels, I believe these are very hard to beat and better than other panels out there. You can see the attached data on the panels, the strength is 5-10 times (depending on loading) greater than EPS panels. Additionally, all the interior is secured with adhesive, no screws penetrate the box.


$29,800 located in Longmont CO. Can deliver for a fee.


Message or call at 72zero.62six.3352

mack.maier@gmail.com

IMG_2376.jpeg
IMG_2378.jpeg
IMG_2379.jpeg
IMG_2377.jpeg
IMG_2369.jpeg
B1C0CCF2-F9B9-47C4-A8C6-F8B9AD14F9FB (1).jpeg
 
Last edited:

Mack M

Active member
Additional photos of the interior and data on Lemker panels. If you are looking for a camper made of EPS, read about the differences in strength compared to the Kerdyn 80 PET panels Bison/Lemker uses.
 

Attachments

  • PET-Gurit Product Data Sheet Kerdyn All 14-0524.pdf
    225.3 KB · Views: 84
  • Composite Sandwich Panels - Engineering Principles, Component Selection, and Our Design Philos...pdf
    3.7 MB · Views: 77
  • IMG_2596.jpeg
    IMG_2596.jpeg
    2.3 MB · Views: 314
  • IMG_2597.jpeg
    IMG_2597.jpeg
    2.1 MB · Views: 314
  • IMG_2598.jpeg
    IMG_2598.jpeg
    2.5 MB · Views: 317

longbody

New member
Hi Longbody, yes it is. I can sell the whole package, one, or the other.
I think you initially posted the price but I don't see it now (unless I missed it). Also, would you post a photo of the two separate door pillar decals that shows payload and GVWR?
 

Mack M

Active member
Certainly, I was originally asking $82k for both truck and camper, but I'd take $80k for both. Let me go take those photos. Just a minute.
 

Mack M

Active member
I think you initially posted the price but I don't see it now (unless I missed it). Also, would you post a photo of the two separate door pillar decals that shows payload and GVWR?
Here you go. Here is one with the current odometer reading as well. The truck is stock, but I've added 5 Falken at4s in 285/75/17, as well as clear 3M window tint to remove heat, husky floor liners and rear wheel well liners (because it didn't come with them.
 

Attachments

  • IMG_2819.jpeg
    IMG_2819.jpeg
    2.3 MB · Views: 50
  • IMG_2815.jpeg
    IMG_2815.jpeg
    1.8 MB · Views: 51
  • IMG_2814.jpeg
    IMG_2814.jpeg
    2 MB · Views: 52
  • IMG_2813.jpeg
    IMG_2813.jpeg
    2.2 MB · Views: 48
  • IMG_2807.jpeg
    IMG_2807.jpeg
    4 MB · Views: 50

longbody

New member
Here you go. Here is one with the current odometer reading as well. The truck is stock, but I've added 5 Falken at4s in 285/75/17, as well as clear 3M window tint to remove heat, husky floor liners and rear wheel well liners (because it didn't come with them.
What is your asking price for (1) the truck and (2) the truck with camper?
 

Mack M

Active member
Hi there, 1, I'm nervous to sell the truck prior to selling the camper, because they are being stored in my brother's barn, and if I sell the truck first, I won't have a way to move the camper. So I don't necessarily have a truck alone price (I hadn't thought about that, I have $55k into the truck), but feel free to make me an offer. Truck and camper together I can do $79,500, which is a very good deal.
 
Last edited:

Forum statistics

Threads
188,560
Messages
2,906,916
Members
230,666
Latest member
Cvonruex
Top