2024 Bison Overland Camper (INTERIOR MOSTLY INSTALLED) $32k

Mack M

Active member
Greetings,
IMG_2598.jpeg
IMG_2598.jpeg

My financial situation has changed, and I'm looking to sell my truck and camper, as a whole unit at this time, as the camper is custom to fit in the bed of the truck with the tailgate closed. Truck and camper are located in Longmont Colorado.

Everything is in like new condition, and was purchased new from factory four months ago, and has been covered ever since in storage. The camper has 90% of the powder coated aluminum interior installed; I have not installed the cabinet over the sink, or the final piece of the countertop, as that will be dependent on the buyer’s desires. Additionally, I have not installed the water tank seat at the front of the camper as water tank size will depend on the buyer.

The details:

Camper:

  • 2024 (picked up from factory in Oklahoma in July) Bison Overland Camper, dry weight around 950 lbs
  • 4 windows added and roof vent
  • Jacks added
  • Arctic Turn door added
  • Interior build out kit added (I powder coated it Gray, comes raw aluminum from Bison). Kit is aluminum with bamboo doors and countertops.
  • I have added a 4 inch memory foam mattress and breathable underlayment. You will see in the photos that it hangs off the edge. My desire was to put in a horizontal piece, 10 inches deep, allowing for a full King size bed. I have not added this, in case the new owner wants the existing bed size (64” x 78”)

Everything is in like new condition, ready for adventures.


There is zero wood in the camper. Bison is made with Lemker panels made of PET Gurit Kerdyn Pannels (not EPS), and are all made in America with aluminum powder coated extrusions. If you really look into panels, I believe these are very hard to beat and better than other panels out there. You can see the attached data on the panels, the strength is 5-10 times (depending on loading) greater than EPS panels. Additionally, all the interior is secured with adhesive, no screws penetrate the box.


$32k, located in Longmont CO.


Message or call at 72zero.62six.3352

mack.maier@gmail.com

IMG_2376.jpeg
IMG_2378.jpeg
IMG_2379.jpeg
IMG_2377.jpeg
IMG_2369.jpeg
B1C0CCF2-F9B9-47C4-A8C6-F8B9AD14F9FB (1).jpeg
 
Last edited:

Mack M

Active member
Here is the window sticker on the truck.

Also has wireless Android Auto and Apple CarPlay.
 

Attachments

  • IMG_2432.jpeg
    IMG_2432.jpeg
    3.3 MB · Views: 121

Mack M

Active member
Additional photos of the interior and data on Lemker panels. If you are looking for a camper made of EPS, read about the differences in strength compared to the Kerdyn 80 PET panels Bison/Lemker uses.
 

Attachments

  • IMG_2598.jpeg
    IMG_2598.jpeg
    2.5 MB · Views: 171
  • IMG_2597.jpeg
    IMG_2597.jpeg
    2.1 MB · Views: 169
  • IMG_2596.jpeg
    IMG_2596.jpeg
    2.3 MB · Views: 168
  • Composite Sandwich Panels - Engineering Principles, Component Selection, and Our Design Philos...pdf
    3.7 MB · Views: 46
  • PET-Gurit Product Data Sheet Kerdyn All 14-0524.pdf
    225.3 KB · Views: 43

Forum statistics

Threads
188,083
Messages
2,901,918
Members
229,523
Latest member
winnrider
Top