Parts are located in San Ramon, CA
BRAND NEW Camburg 1.25” UCA’s- $600
Never installed. These were originally to replace my 1” UCA’s, but I ended up going long travel before this. Also including a few extra upper rubber bushings from my old set of arms (not pictured). Shipping should run you around $40 anywhere in the US.
Factory LCA's w/ Total Chaos LCA Skids Installed- SOLD
These LCA's have roughly 75k miles on them, and as with any used LCA's I would recommend inspecting/replacing the LBJ's. They also have a set of Total Chaos LCA Skids installed which have a few scrapes but are ready for more abuse!
All Pro 3.5” Lift Springs- $150 (local pickup only)
Dirty and used, but no problems. Ended up going to custom CSS to support my rear bumper, drawers, etc…
BRAND NEW Camburg 1.25” UCA’s- $600
Never installed. These were originally to replace my 1” UCA’s, but I ended up going long travel before this. Also including a few extra upper rubber bushings from my old set of arms (not pictured). Shipping should run you around $40 anywhere in the US.
Factory LCA's w/ Total Chaos LCA Skids Installed- SOLD
These LCA's have roughly 75k miles on them, and as with any used LCA's I would recommend inspecting/replacing the LBJ's. They also have a set of Total Chaos LCA Skids installed which have a few scrapes but are ready for more abuse!
All Pro 3.5” Lift Springs- $150 (local pickup only)
Dirty and used, but no problems. Ended up going to custom CSS to support my rear bumper, drawers, etc…
Last edited: