An introduction and another stupid question

[dudeandadog]

I just loosen it, I don't remove it

I pulled it and shot some liquid wrench in the hole with hopes of freeing it up. I'm gonna let it work its magic overnight and see how it goes.

 

[dudeandadog]

Just gonna replace the whole kit & caboodle. For reference Atwood Hydro Flame 7920II is not available and you need dometic part # 31384. You can also get the squirrel cage
Amazon.com: Squirrel Cage Impeller, Stove Motor Blower Fan Distribution Convection : Home & Kitchen https://share.google/y45WeFjXz1QynEVYt

It's not worth the trouble to hack it just to have the same problem next winter.

 

[2Toyotas]

 

[dudeandadog]

View attachment 906208

I've been on a losing streak. 1st I rounded a bolt on my fan tensioner, then I had an exhaust bolt break off while doing a starter and most recently I gave myself a good zap while wiring the solar. I can't seem to catch a break over here. At the point I'd rather pay someone to break it, then it's their problem.

 

[dudeandadog]

Maybe I won't forget the plug or a latch again. Luckily I had some slack and didn't rip anything apart.

 

[dudeandadog]

I have a renogy charge controller that is wired as a trickle charger with nothing coming from the "load"
Can I use those outputs as a power source for a charging station?