AWD Chevy 1500 Adventure Van

[ajmaudio]

Kitchen Pod

I found a sink/stove unit, water jugs and aluminum cabinet that fit together perfectly! The table top and folding leaf were made from 1/2" plywood and Formica. I also whipped up a 6" wooden base and mounted the kitchen pod to the L-track with threaded studs. It should quickly come out when needed.

I still need to finish the plumbing and wiring but hopefully I'll have running water by the end of the week!

What CNC you using there?

 

[RVflyfish]

I found a sink/stove unit, water jugs and aluminum cabinet that fit together perfectly!

Where did you find the aluminum cabinet?

 

[SBaircraft]

What CNC you using there?

I have a Shopbot Buddy with a 4ft x 4ft table. It's not super precise, but it has been reliable.

 

[SBaircraft]

Where did you find the aluminum cabinet?

https://www.modulinecabinets.com/ It was a little pricey, but the fit was perfect. It matched the depth of my Adrian Steel shelving unit, my water tanks fit snug inside, and after trimming the flange, there was just enough room for my sink/stove.

 

[RVflyfish]

Thanks for the reply. Agreed, aluminum is more pricey than steel. But if you drive it far enough you’ll probably make up the difference in fuel economy.

 

[ajmaudio]

I have a Shopbot Buddy with a 4ft x 4ft table. It's not super precise, but it has been reliable.

How "not precise" is that if I may?