Bilstein's for ~1.5-2" Lift '11 E-150?

[GimpyGolden]

So I've searched and read a bunch of threads but still no definitive answer to what length shock I should run on my soon to be mildly lifted E-150.
I have some Moog CC880 coils to go in and rear springs will be rebuilt to match.

From what I've read many are using stock recommended Front 33-18753 and rear 33-176840. Question is will this not limit wheel travel gained by the lift?
Stock shocks have 5" travel in front and 8" in back. I was thinking of sourcing a set that are 1-2" longer travel. Problem with this is collapsed length is longer and I worry shock will bottom before hitting bumpstop. Would that be the case or will added travel prevent the shock ever compressing that far?
Very confused about now!

 

[Raul]

On my 2000 E150 2wd I used Front and Rear. They were spec for the 350 and worked great on my setup (cc880 front and HD springs in rear). I loved it. Your 2011 has a chassis similar, if not the same, than the 350 so these shock may fall short. Hope this helps.
Here is the review of my set-up: New Springs review.