Cargo management

[oscar the grouch]

What do people use for securing gear inside the trailers. I was thinking e track. Any ideas

 

[MountainD]

Personally, I prefer L-track. http://www.amazon.com/Steadymate-15...sim_263_4?ie=UTF8&refRID=1J1H35B4HADG8NNBDS44

 

[TwinStick]

http://www.swagoffroad.com/Storage-Solutions_c_9.html

http://store.arbusa.com/Storage-Solutions-C75.aspx

Many options, from cheap to expensive.

 

[fog cutter]

i've had good luck with a variety of products from these folks: http://www.uscargocontrol.com/.

especially the stainless ratchet straps.

another good source for custom stuff: https://www.strapworks.com/default.asp

 

[FlagRS]

I have a piece of E-Track on each side of the bed wall about half way up in my trailer. My builder used them to help secure the fender’s bolts on the inside. And I have my chuck box strapped to one side and a table strapped to the other side. Then I pack everything else nice and tight. Once everything is packed it’s so tight the chuck box and table probably wouldn’t move even if not strapped.


I remember seeing this picture from the “Chaser #15 for Sale” thread and I was intrigued with the way it was packed.

 

[oscar the grouch]

hmm i wonder if i have enough gear going to pull that off. still need to strap down my cooler and propane tho. dont have brackets built yet.

 

[FlagRS]

More from Chaser #15 - here you can see it unloaded and the dividers he made, pretty cool IMO.

 

[oscar the grouch]

Hmmm. May have to do it this way. Problem is I'm always swapping coolers and gear based on season and duration

 

[fog cutter]

it's finding the solution that makes it fun.

 

[Oscar Mike]

Subscribed, I am pondering tie downs in my Ruger Trailer and have no solutions...yet.

 

[brian90744]

my M416 Holders

I installed hold down strips to both sides of my M416, they can be installed any where on the side =low or higher.