Mr. T
Member
The Colman Deluxe Kitchen legs do not adjust at all which can make it fun finding a place where it is level or putting something under the legs to level the kitchen. So I did a mod to the legs so that I can level it with little effort.
Parts needed to one leg 3/8 nut, 3/8 wing nut, 3/8 x 2.5" carriage bolt.
Drill 3/8 hole in the center of the plastic foot insert.
With small file enlarge opening on both side’s so that the 3/8 nut can be inserted (file away plastic only on the side toward the bottom of the insert).
The wing nut is to lock carriage bolt in place once you get the kitchen level.
See Pic’s
Parts needed to one leg 3/8 nut, 3/8 wing nut, 3/8 x 2.5" carriage bolt.
Drill 3/8 hole in the center of the plastic foot insert.
With small file enlarge opening on both side’s so that the 3/8 nut can be inserted (file away plastic only on the side toward the bottom of the insert).
The wing nut is to lock carriage bolt in place once you get the kitchen level.
See Pic’s
Attachments
Last edited:
