Columbia Rovers RRC bumper now available!

[lwg]

Columbia Rovers RRC bumper now available! + other LRNR Discounts!!

Back by popular demand. This bumper is CAD designed to follow the lines of your Classic Range Rover and designed to use the stock mounting points on your truck to ease installation. No modification required for installation! D-Ring tabs are integrated into the bumper for those who choose to remove the stock hitch for extra clearance. There are two versions of this bumper. The first as shown below will be a stock bumper replacement which is a nice alternative for those who don't need the extra protection or added weight of a full coverage bumper. The latter version will follow and provide full coverage for those vehicles who require the extra protection.

As with all our products, the Range Rover Classic bumper is CAD designed, laser cut cold rolled steel, welded and then phosphate dipped to aid in powdercoating adhesion.

Price: $500 Short (Ideal stock length replacement)
Call Columbia Rovers at 503-227-3766 to order yours!

Free delivery to the Land Rover National Rally in Leadville, CO!!

http://www.lgindustries.net/bumpers.html

ALSO we are offering the following discounted prices for pre-order and free delivery to the Land Rover National Rally in Leadville, CO. Please note these prices are only valid until the rally:

New Style ARB 50Qt Fridge, $725 delivered to the rally

Fuel Tank Skidplate for both DI/RRC & DII, non powdercoated models, $225 delivered to Leadville.

Look for our new online eCommerce website very soon!

 

[MuddyOval]

Wow! That is VERY well done... nice work!

 

[lwg]

Also, as a side note because I don't want to clog up this forum, we are offering our skidplates for a rally special of $225 delivered to the Land Rover National Rally. These are available for both D1/RRC and the DII and weigh in at only 18 lbs!

They can be seen here:

http://www.lgindustries.net/Skidplates.html

Note that the powdercoated versions are still $25 more as they cost a bit more for the coating.

D1/RRC skidplate

And a pic of a powdercoated black D1/RRC skidplate

 

[Oxcart13]

Nice bumper Larry - very clean. Mark

 

[Michael Slade]

Can I get one that's not powdercoated, bare steel, with a rear swing-away tire and jerry can holder?

I want to galvanize it.

 

[lwg]

Can I get one that's not powdercoated, bare steel, with a rear swing-away tire and jerry can holder?

I want to galvanize it.

Yipper, just a few weeks before we have the tire carrier finalized. I've got a bare steel one in the garage now that we're going to build the carrier off of. This is something I originally planned on doing two years ago, it just never got off the ground. Probably has something to do with moving and all...

 

[Michael Slade]

Life gets in the way don't it?

No hurry on the bumper...I'll be ready whenever it is. I just have to decide if I'm going to keep the Range Rover now...if I do your bumper will go on it.

 

[muskyman]

Larry

great looking bumper...I may need to pick one of these up at some point!!

Thom

 

[jrose609]

When are you going to do a D1 rear bumper?

 

[Gore Ranger]

Larry-

do you know if your skid will fit an 1989 RRC with the steel tank? I know it is listed as different, but the mounting looks identical. If it works, I would buy one for rally delivery. Thank you

 

[lwg]

Larry-

do you know if your skid will fit an 1989 RRC with the steel tank? I know it is listed as different, but the mounting looks identical. If it works, I would buy one for rally delivery. Thank you

No it will not. I had an early 1990 RRC with the same tank and it won't fit. But the bumper should fit just fine

 

[Gore Ranger]

Shoot, that's what I thought.

Your rear bumper looks great, but I already have a Rockware rear bumper.

Larry,
I am curious if you had a fuel tank skid on your 1990 or if you feel that the stock steel strap is sufficient with the metal tank? What are other early RRC's doing as I dont think any vendors sell one for these early trucks. Thanks

 

[azarmadillo]

Did anyone happen to save the photos of these bumpers?