Conqueror Compact Bolt pattern

[MIGZ]

Does anyone what the bolt pattern is for a Conqueror Compact.

 

[dieselandmud]

6 on 140mm

http://www.alko.co.za/pages/products/rims.htm

Are you looking to get an adaptor?

 

[Hilldweller]

6 on 140mm

Are you sure?
I'll try to remember to measure when I get home but I thought it was 6 on 4.5....

 

[MIGZ]

So it could possibly fit Toyota wheels if its the 6 by 140mm which is 5.5in.

 

[Hilldweller]

So it could possibly fit Toyota wheels if its the 6 by 140mm which is 5.5in.

Is that the same pattern as a Landy? I think they were trying to match them since they were mostly pulled by Defenders all over the Empire...

 

[red_5]

6x5.5 by my measurement. Same as me XTerra.

Which means I won't have to buy wheels when I can afford to swap out the axle for one with brakes.

:sombrero:

 

[JIMBO]

:sombrero: I don't know what year your X is, but

2nd gen X's are 6x41/2" ProComp 7089/8089-6868 wheels fit and I have adapters at 5x5 ('08 jeep JK)to 6x41/2 "

I have no idea what the Conqueror is !!

Back to the scheduled program--

:costumed-smiley-007:safari-rig::safari-rig: JIMBO

 

[red_5]

That would 2002 on the year model. 2000~2004 all same on that bit.

I should have specified.

The Conqueror in question being a trailer.

Lots of info here about them, but here's mine:

http://www.expeditionportal.com/forum/showthread.php?t=30871&page=2

 

[Hilldweller]

6 on 5.5 --- I just measured mine and submit to the wisdom of the panel of Elders...
:sombrero: