hollaback55
Explorer
selling my custom M101CDN modified in the AT chaser theme. Has tons of custom touches and comes completely outfitted to hit the back country
Build Link Here: http://www.expeditionportal.com/forum/threads/67117-My-M101cdn-Build
Quick Info
Custom Aluminum Lid
SS Hinges
Lockable Latches
125 LB lift struts
Thule Tracks
3 58" Load bars
Podium 460 Feet
Water and Dust Proof - Automotive bulb seal used
Front Frame Section - 2x3 box steel
Steel Skid Plate covers entire underside
AT 19 gallon Water Tank, Lockable Holder, Hand Pump
AT Scepter Jerry Can Holders
AT Nose Box
Deka Group 31 AGM
Noco 10 amp charger
Aims 600 Watt Inverter
3 Fused 12 volt Outlets - 1 in main trailer for fridge
Shore Power Inlet
2 gauge Power Leads to vehicle
5lb Propane Tank & Holder
Sierra 4x4 Fenders and Custom Steps fore and aft (300 lb carrying capacity)
Fenders, Steps, Interior trailer box all shot with heavy duty bedliner
AT Baltic Birch Shelf, Custom Holder
AT Interior Led Light Red/White
2.9 Gallon Water Pump
LED Tailights, Marker Lights, Plate Light
Bulldog 5k Jack & 6" Wheel
Max coupler, silent hitch pin, safety chains
Trailer was just painted to match my jeep. All hardware used throughout is SS. Tons of custom touches, must be seen in person to appreciate. Current suspension and tires are stock, has worked great for us while traveling across the US and down through toroweap area of GC. Currently located in Hartford CT
Build Link Here: http://www.expeditionportal.com/forum/threads/67117-My-M101cdn-Build
Quick Info
Custom Aluminum Lid
SS Hinges
Lockable Latches
125 LB lift struts
Thule Tracks
3 58" Load bars
Podium 460 Feet
Water and Dust Proof - Automotive bulb seal used
Front Frame Section - 2x3 box steel
Steel Skid Plate covers entire underside
AT 19 gallon Water Tank, Lockable Holder, Hand Pump
AT Scepter Jerry Can Holders
AT Nose Box
Deka Group 31 AGM
Noco 10 amp charger
Aims 600 Watt Inverter
3 Fused 12 volt Outlets - 1 in main trailer for fridge
Shore Power Inlet
2 gauge Power Leads to vehicle
5lb Propane Tank & Holder
Sierra 4x4 Fenders and Custom Steps fore and aft (300 lb carrying capacity)
Fenders, Steps, Interior trailer box all shot with heavy duty bedliner
AT Baltic Birch Shelf, Custom Holder
AT Interior Led Light Red/White
2.9 Gallon Water Pump
LED Tailights, Marker Lights, Plate Light
Bulldog 5k Jack & 6" Wheel
Max coupler, silent hitch pin, safety chains
Trailer was just painted to match my jeep. All hardware used throughout is SS. Tons of custom touches, must be seen in person to appreciate. Current suspension and tires are stock, has worked great for us while traveling across the US and down through toroweap area of GC. Currently located in Hartford CT
Attachments
Last edited: