Drivedshaft swap and pinion angle adjustment

[Stroked 550]

I have a 2011 4 door wrangler

My oem driveshaft broke and I replaced it with an aftermarket unit

my Driveline angle is 6.2
my pinion angle is 7.4

Do I need to adjust the pinion angle more or is that safe to drive with as is?

 

[Bullseye240]

What type of driveshaft did you replace it with? A stock style or a double cardan style. If it is a double cardan then you need to have the pinion pointing directly at the output of the transfercase. With a single u-joint on each end the output angle needs to cancel the input angle.

 

[Superduty]

Some more good info:

Driveshaft Angles