edgestar 43qt actual measurement please!!

[freshlikesushi]

IIs there any way anyone can do an actual real world measurement of the bottom of this device?
Im going to have a piece of steel bent up here at work to make a sliding tray for it, and need to know the actual width of the bottom. Is it a vertical side face or does it venture outward as it heads to the top of the fridge. Also actual length. Plan is to make a tray basically. then use 2 2"x2" L stock to bolt the hinges to and use the sides of this tray to mount the other half of the hinge to. any help would be appreciated

 

[4x4junkie]

Mine measures 16-5/16" x 23-3/8" (not including protrusions such as power plug, drain plug). Sides are straight (vertical).

 

[freshlikesushi]

perfect. thanks. front and rear protrusions arent an issue as im just making a cradle

 

[WhileInTheWild]

The protrusions are on the side.

 

[Xterabl]

Yeah, it has the following protrusions: handles on the left and right sides; lid latch on the front; lid hinges on the back.
Let me know if you want measurements.

 

[freshlikesushi]

I was just worried about the base. above 2" or so it doesn't really matter on the sides. I made the sliders yesterday and the fridge will be here today ill finish up the slide

 

[freshlikesushi]

Subaru Outback Packed up by Grant Wilson, on FlickR

Thanks guys!