Extending the Support Leg on a Lifted M101/M416 Trailer

[SavageSunJeep]

Since I added the Delta Box I haven't any place to put the trailer bolt on support leg that most folks have on their trailers.


Since the M101 and M416 Jeep trailers come with a support leg that is perfectly good and out of the way, then all one would have to do is extend the leg and now your trailer would set level.


Full writeup and pics here: http://www.savagesun4x4.com/enter/jeep_installs/m101_military_jeep_trailer_.html

 

[durango_60]

Nice writeup. I was planning the same mod but while in Wilmans garage we discovered that the old landing leg from his bantam was the perfect length and fit for my m101 on 32's.

 

[SavageSunJeep]

Nice writeup. I was planning the same mod but while in Wilmans garage we discovered that the old landing leg from his bantam was the perfect length and fit for my m101 on 32's.

Thanks. Yes if you are sitting on some smaller tires you need something that is a bit shorter. I am sure that I will lower mine as where I have it sitting is on a small slope and I leveled it for that.

My Jeep sits on 37's and I have 35's on the trailer so I needed to get mine a bit further in the air...