Ford E350 4x4, V10 Motor, $18,995 obo (Boulder, CO) - SOLD!

HFDesignworks

New member
Up for sale is my 2000 model year Ford E350 custom 4x4 van with the hard to find 6.8L V10 motor.

Looking for something that will truly get you out to the middle of nowhere and back, look no further.

The van is an absolute beast in the snow and dirt. Plus it can haul a family of four and a trailer.

This van has driven from coast to coast and many areas in between including Tail of the Dragon in Tennessee and the White Rim Trail in Moab. Just last month I drove it out to San Diego and back for a week of camping.

So much customization has gone into this high end build. I know I'm missing some things but going off what I remember here is the build:
The van started off as a 12 passenger Chateau model E350 which in itself is pretty rare. The Chateau models are the upper scale passenger models.
  • As it currently sits, there are four captain’s chairs with a blank canvas in the back (the back is carpeted).
  • AC and heat both front and back with separate controls for the second row.
  • Back in 2019 at approx. 190k miles the van was converted to a 4x4 by 2nd Hand Vans in Florida using the Expo Vans conversion. This included Fox 2.0 shocks, a 6" lift, adding 1 ton axles front and rear, and a front differential for both four wheel high and low, front passenger swivel seat, and power adapter for the second row seats.
  • I bought the van in 2021 at 200k miles from the owner of 2nd Hand Vans who had been using it as his personal family hauler. Since owning this van I have worked with UJoint Offroad Colorado to continue to improve it. I added an OX rear locker, Alcan custom rear leaf springs, 35” KO2 tires on Method wheels, steel braided brake lines, Dual steering stabilizer with Fox shocks, Upgraded rear brake setup from UJoint, Upgraded brake pads from Hawk, RedArc brake controller, American Backroad Company front bumper, WeldTec custom roof rack, Aluminess rear tire swing out and side ladder, Vantage Optics headlights and front turn signals, Kenwood stereo deck with speakers, Backup camera, Fender flares, Optima battery (added last year), Ravelco anti-theft system, and rear airbags for towing.
  • At 230k miles I started getting the dreaded Triton engine plug popping. So, I rebuilt the heads with steel inserts and decided to rebuild the motor at the same time. I went with larger Ford Motorsport fuel injectors, flat head pistons, shorty headers, added an oil catch can, and had the van custom tuned by Finish Line Automotive and Performance in Denver, CO.
  • The van now has approx. 246k miles and is running strong.

This van currently needs nothing but a few things to point out – at some point in its life (didn’t happen on my watch) the van had a bondo repair on the driver side. The bondo is cracking which you can see from one of the photos. There is a subwoofer in the second row but it stopped working on my way back from San Diego. The rest of the speakers are a year old and sound great making me realize the powered sub really wasn’t necessary anyway. This van has been amazing and I’ve literally seen the country with it. However it’s now time to let someone else enjoy it.

This van is located in Boulder, Colorado.
 

Attachments

  • 438017123_964081538837118_7750585473226161246_n.jpg
    438017123_964081538837118_7750585473226161246_n.jpg
    199.2 KB · Views: 609
  • 436749475_446325071288480_5353837270068344719_n.jpg
    436749475_446325071288480_5353837270068344719_n.jpg
    146.8 KB · Views: 531
  • 436646142_1575220879942855_2809016681906419481_n.jpg
    436646142_1575220879942855_2809016681906419481_n.jpg
    134.5 KB · Views: 498
  • 427927463_407864832181167_8147356559812228275_n.jpg
    427927463_407864832181167_8147356559812228275_n.jpg
    107 KB · Views: 495
  • 427972120_850149666934932_8812213461420870684_n.jpg
    427972120_850149666934932_8812213461420870684_n.jpg
    157.5 KB · Views: 493
  • 427730536_1113387613332807_8296685144747445964_n.jpg
    427730536_1113387613332807_8296685144747445964_n.jpg
    149.4 KB · Views: 493
  • 427706753_4018328585106620_6935676940394703954_n.jpg
    427706753_4018328585106620_6935676940394703954_n.jpg
    127.8 KB · Views: 501
  • 436764585_793926585638876_2402206128580425962_n.jpg
    436764585_793926585638876_2402206128580425962_n.jpg
    163.9 KB · Views: 521
  • IMG_4883.jpg
    IMG_4883.jpg
    1.8 MB · Views: 541
  • IMG_4882.jpg
    IMG_4882.jpg
    1.9 MB · Views: 575

MTwagon

New member
Beautiful rig you have there. Somebody will be happy with their purchase. I have a question for you regarding your Ox locker. Are you happy with it or have you had any problems? I am looking to put front and rear Ox's in my 06 F250, but all of my local shops are trying to steer me towards the ARB. I'm not sure if its because that's what they a familiar with installing or they just want the additional upsell from the compressor. I want them because I want everything to be as mechanical (aka reliable) as possible. I'll always take a lever over a button. Thanks!
 

HFDesignworks

New member
Beautiful rig you have there. Somebody will be happy with their purchase. I have a question for you regarding your Ox locker. Are you happy with it or have you had any problems? I am looking to put front and rear Ox's in my 06 F250, but all of my local shops are trying to steer me towards the ARB. I'm not sure if its because that's what they a familiar with installing or they just want the additional upsell from the compressor. I want them because I want everything to be as mechanical (aka reliable) as possible. I'll always take a lever over a button. Thanks!
The Ox locker has been great. I did need to replace a seal and Ox was great to work with. They sent me the part as well as a bunch of other miscellaneous parts just in case. All at no charge. I’ve had air lockers in the past and preferred the simplicity of this cable actuated locker.
 

Forum statistics

Threads
188,159
Messages
2,902,811
Members
229,582
Latest member
JSKepler
Top