mattpayne11
Member
Hi, I have a 2011 Toyota 4Runner with some pretty nice upgrades already but was looking to fine-tune my rig for further overlanding with a priority on set-up and space conservation / organization / power (solar). I currently have two ARB Outback rollers (one tall and one short), and it looks like the previous owner had it rigged for an ARB fridge/freezer to be mounted on the shorter roller. It also has a second battery installed with a smaller diameter power outlet running to the battery for the fridge (I presume). I'm looking to purchase and install an ARB fridge/freezer and would love to make sure it works on this system set-up.
I am also looking to upgrade from my Tepui tent to an iKamper with a solar panel set-up like this: https://www.rhinoadventuregear.com/products/skycamp-by-ikamper?variant=12397762117750 https://www.rhinoadventuregear.com/...roof-top-tent-solar-panel-for-ikamper-skycamp
This way, it will keep my battery charged for the fridge. Lastly, I want to either replace or convert my existing ARB drawer to also accommodate a stove, like this: https://atoverland.com/collections/fridges-and-slides/products/at-combo-slide
So, my questions:
1. I am not familiar with the D/C power outlet that's installed, it appears to be a smaller diameter than a traditional 12V cigarette lighter - will this work with a ARB fridge/freezer? It looks to be dedicated to the Aux battery... which is connected to a input thing (photo 3) and then that is wired to an IBS battery monitor/link.
![image2.jpeg image2.jpeg](https://expeditionportal.com/forum/data/attachments/504/504422-43e740765b29c1753cdaaaf5e0a400db.jpg)
![image1.jpeg image1.jpeg](https://expeditionportal.com/forum/data/attachments/504/504423-2c3fea184ec66f828be0740bcaa1e932.jpg)
![image3.jpeg image3.jpeg](https://expeditionportal.com/forum/data/attachments/504/504421-1785b8b96d5f5e38db24634cc10d54ab.jpg)
![image4.jpeg image4.jpeg](https://expeditionportal.com/forum/data/attachments/504/504420-3d1ecc650e2d9cb5c3ce4b17a275e803.jpg)
![IMG_7850.jpg IMG_7850.jpg](https://expeditionportal.com/forum/data/attachments/504/504425-6e1bacc92114a4b7390f4ba9bbbcabe7.jpg)
2. Does the existing set-up look to be able to accommodate what I have in mind?
3. Is it possible to attach the atoverland slider to the top of the shorter ARB slider to then mount the fridge to, with the stove as a pull out?
![image0.jpeg image0.jpeg](https://expeditionportal.com/forum/data/attachments/504/504424-ff0c8e4e47d34781ef8a3a204cabdb87.jpg)
And, if looking to do solar down the road, what would be the best way to get that to work with the battery?
I am also looking to upgrade from my Tepui tent to an iKamper with a solar panel set-up like this: https://www.rhinoadventuregear.com/products/skycamp-by-ikamper?variant=12397762117750 https://www.rhinoadventuregear.com/...roof-top-tent-solar-panel-for-ikamper-skycamp
This way, it will keep my battery charged for the fridge. Lastly, I want to either replace or convert my existing ARB drawer to also accommodate a stove, like this: https://atoverland.com/collections/fridges-and-slides/products/at-combo-slide
So, my questions:
1. I am not familiar with the D/C power outlet that's installed, it appears to be a smaller diameter than a traditional 12V cigarette lighter - will this work with a ARB fridge/freezer? It looks to be dedicated to the Aux battery... which is connected to a input thing (photo 3) and then that is wired to an IBS battery monitor/link.
![image2.jpeg image2.jpeg](https://expeditionportal.com/forum/data/attachments/504/504422-43e740765b29c1753cdaaaf5e0a400db.jpg)
![image1.jpeg image1.jpeg](https://expeditionportal.com/forum/data/attachments/504/504423-2c3fea184ec66f828be0740bcaa1e932.jpg)
![image3.jpeg image3.jpeg](https://expeditionportal.com/forum/data/attachments/504/504421-1785b8b96d5f5e38db24634cc10d54ab.jpg)
![image4.jpeg image4.jpeg](https://expeditionportal.com/forum/data/attachments/504/504420-3d1ecc650e2d9cb5c3ce4b17a275e803.jpg)
![IMG_7850.jpg IMG_7850.jpg](https://expeditionportal.com/forum/data/attachments/504/504425-6e1bacc92114a4b7390f4ba9bbbcabe7.jpg)
2. Does the existing set-up look to be able to accommodate what I have in mind?
3. Is it possible to attach the atoverland slider to the top of the shorter ARB slider to then mount the fridge to, with the stove as a pull out?
![image0.jpeg image0.jpeg](https://expeditionportal.com/forum/data/attachments/504/504424-ff0c8e4e47d34781ef8a3a204cabdb87.jpg)
And, if looking to do solar down the road, what would be the best way to get that to work with the battery?