FS: 2022 Toyota Tacoma OR DC with Super Pacific topper - Winston Salem, NC

[ncflyer]

2022 Silver Tacoma up for sale with good base mods for someone to build on as desired or go as is. The suspension and Super Pacific were installed at a shop, and I have done the rest. No issues from my work so far. I’ve done 3 weekend guided offroad events and a few offroad training classes with it. I will have the truck as is for sale for a week or so and if no serious inquires, will be open to offers for some mods from the truck. If I pull items from the truck for the next vehicle or sale to others, then I’ll adjust pricing as things as are removed. I may be open to selling the camper separately at some point pending interest.

I have much of the paperwork for mx and items on the truck. The oil and diff fluids were changed recently using AMSOIL, with a pre-trip inspection at a local shop with reference list. All things checked out with no contamination of diff fluids per the shop.

Read through all posts. I will put each section separately to break out better.

2022 Silver Off Road Double Cab @ app 10300 miles that may go up some but not a daily driver, with no lien.

(I’ve attached a pic of the sticker to see how it came vs listing)

**Does have minor trail damage on left rear and small paint chip on center of hood*

**Best guestimate on the add-ons, not factoring in any labor or taxes and deducting 10% from each "group", minor damage and KBB value for truck....

$ 59,000 as is.

I will consider removal/change of tires and or aluminum sliders for serious interest.
Let me know if there are specific questions or clarification.

 

[ncflyer]

Exterior mods

Backwoods Adv mods bumper with guard

COME UP 9.5 seal winch with 5/16” masterpull 100’ orange winch line (21,700lb mbs) Has remote and wired controller.

Factor 55 fairlead and flatlink

BD SAE fogs and LP4 amber lights (both wired to sPod)

Greenlane Aluminum sliders (66lbs total) - have taken good hits with no issues but can’t be used a jackpoint.

Maritin OR Roofrack. Large deflector adjustable to allow maxtrax or other item mounting

Mt Hatch tailgate panel

Falken AT3W 235/85/16 tires including spare

ARB snorkel with prefilter (original scoop sold – top was shortened to level with cab so regular scoop will not work – too short to stay secured)

Bed stiffeners

ARB read diff breather run to L Rear taillight box.

Some trail damage to wheels but cosmetic only

 

[ncflyer]

Interior mods


Expedition Essentials powered accessory mount (1 67designs ball mount with screws for other accessories.

Changed up radio knobs to better version

WeatherTech floor mats

sPod 8 channel controller on left of steering wheel

 

[ncflyer]

Suspension
Dobinson IMS suspension (see kit breakdown for reference)

Sumo springs with flip kit for rear leafpack

SS Brakelines F and R (does make brakes feel more firm – slightly better than stock)

Hammer hangars

** Rides good/firm with topper with no sway when driving/offroad.

 

[ncflyer]

Engine bay

Original version sPOD with custom OEM style mount for panel on left of dash

Odyssey battery with SDHQ terminals

OTT med. Tune

ARB dual compressor with manifold (no lockers attached)

Power Cutoff for winch (Is a wireless option so has a small drain if left on)

J&L oil catch can

 

[ncflyer]

Super Pacific topper

Basic set up, no panels/storage etc. Original Exped was changed over to a HEST foam for personal preference for little more convenience. Easily folds over and closes with no issues. Negative is no bedding could be stored or if insulation kit is added. Works for me (app 170lbs) but larger may want to switch to alternate. (If mattress not wanted I’ll keep it and deduct cost)

Black exterior/Tan material

Rear Window

Light switch panel mod to sit in camper slot.

Power connection slot not wired

2 Zamp Solar Obsidian 100 w each panel wired with power connection wired into topper by SP

Will include a set of poles to make an awning with front window flap.

Truck will fit into apt garage with tailgate weighted down with about 160lbs. Does hit top overhang rubber below opening but no issues.

Interior is basic as seen with homemade lower plate and drawer is a repurposed drawer from an old set up used in a 4runner. Have more parts to it but will consider removal if not wanted.



** There was cosmetic damage to left side camper door in shipping but superficial only and got touch up pen/paint from SP and painted over**.

 

[ncflyer]

additional

 

[ncflyer]

bump