Have a few items For Sale on T4Org: Full-Length Flat BajaRack for 5th Gen. Had this mounted on my T4R for about a year and half. Sold the 5th Gen and bought a Tacoma DCLB TRD 4X4. This has been sitting in my garage for months, as I have been overseas. It does NOT have the moonroof cut-out, as I had a SR5 with NO moonroof. $600. Rack is located in Louisville, KY. Will not ship due to size etc. Will help the buyer install it! Fun times, will even provide the beer. *I do not have PayPal, long story-short: They made a BAD business decision with me and I do not use their services since then. Best forms of payment are cash (the green kind), check, or USPS Money Order. Isn't that so old school?
Manufacturer info: http://www.bajarack.com/4runner-g5-ut
-Gobi Ladder for 5th Gen. Standard Gobi ladder, but had to grind down the top portion a bit due to it contacting the above left rear BajaRack (this is common). Then recoated with a black primer and undercoat material. No structural problems with it. $125. No Shipping. Will help buyer install it.
Manufacturer info: : http://www.gobiracks.com/racks_detail_acc.cfm?ID=943
-Pioneer AVIC-Z140BH Multimedia A/V Navigation Receiver. Was also installed in my 5th Gen, then removed prior to sale. Comes with steering wheel control interface, GPS antenna, microphone, back-up camera, and all manuals etc. Big 7” WVGA display, and your passengers can watch DVDs while you drive. Will ship on your dime. Will ship on your dime. $750 (currently sells for $1500)
Manufacturer info: http://www.pioneerelectronics.com/PUSA/Car/GPS-Navigation/AVIC-Z140BH?tab=firmware
-The AVIC comes (meaning free) with a Scosche Double Din dash kit. Part # TA2106B. This was for a 2011 SR5, so please check your model year/fitment.
Manufacturer info: : http://www.scosche.com/car-audio/installation/2010-toyota-4-runner-double-din-and-din-with-pocket
-Single sliding drawer storage box. Covered in black felt. Has 4 turnbuckles to hold it secure. Made this out of cabinet-grade birch for strength. $120.
-Behind The Grille Light Bracket, made by SOcalTrail. This has a 20” Chinese LED Combo light bar already installed. Yes, the light is actually 21” and 1/2” wide, I didn’t make it! The light works perfectly, didn’t feel like removing it. The work has been done by me. $120. Will ship on your dime.
•Specs on light: 20" High output led light bar (21.5" from end to end), with Center 32 LED's spot 30 degree; Side 8 LED's flood 60 degree, Input Voltage: 9-32V DC. Power Consumption: 120W(3W40pcs High Intensity CREE LEDs). Lumen Flux: 7500+LM. Color Temperature: 6000K. Beam Pattern: Spot. Beam Angle: Combo; 30 degree + 60 degree.
Manufacturer Info: http://www.toyota-4runner.org/5th-g...erested-behind-grill-light-mount-bracket.html
All the above also advertised locally on CL @: http://louisville.craigslist.org/pts/4860373815.html and T4R.Org: http://www.toyota-4runner.org/sale-...rack-gobi-pioneer-bracket-storage-lou-ky.html
Manufacturer info: http://www.bajarack.com/4runner-g5-ut
-Gobi Ladder for 5th Gen. Standard Gobi ladder, but had to grind down the top portion a bit due to it contacting the above left rear BajaRack (this is common). Then recoated with a black primer and undercoat material. No structural problems with it. $125. No Shipping. Will help buyer install it.
Manufacturer info: : http://www.gobiracks.com/racks_detail_acc.cfm?ID=943
-Pioneer AVIC-Z140BH Multimedia A/V Navigation Receiver. Was also installed in my 5th Gen, then removed prior to sale. Comes with steering wheel control interface, GPS antenna, microphone, back-up camera, and all manuals etc. Big 7” WVGA display, and your passengers can watch DVDs while you drive. Will ship on your dime. Will ship on your dime. $750 (currently sells for $1500)
Manufacturer info: http://www.pioneerelectronics.com/PUSA/Car/GPS-Navigation/AVIC-Z140BH?tab=firmware
-The AVIC comes (meaning free) with a Scosche Double Din dash kit. Part # TA2106B. This was for a 2011 SR5, so please check your model year/fitment.
Manufacturer info: : http://www.scosche.com/car-audio/installation/2010-toyota-4-runner-double-din-and-din-with-pocket
-Single sliding drawer storage box. Covered in black felt. Has 4 turnbuckles to hold it secure. Made this out of cabinet-grade birch for strength. $120.
-Behind The Grille Light Bracket, made by SOcalTrail. This has a 20” Chinese LED Combo light bar already installed. Yes, the light is actually 21” and 1/2” wide, I didn’t make it! The light works perfectly, didn’t feel like removing it. The work has been done by me. $120. Will ship on your dime.
•Specs on light: 20" High output led light bar (21.5" from end to end), with Center 32 LED's spot 30 degree; Side 8 LED's flood 60 degree, Input Voltage: 9-32V DC. Power Consumption: 120W(3W40pcs High Intensity CREE LEDs). Lumen Flux: 7500+LM. Color Temperature: 6000K. Beam Pattern: Spot. Beam Angle: Combo; 30 degree + 60 degree.
Manufacturer Info: http://www.toyota-4runner.org/5th-g...erested-behind-grill-light-mount-bracket.html
All the above also advertised locally on CL @: http://louisville.craigslist.org/pts/4860373815.html and T4R.Org: http://www.toyota-4runner.org/sale-...rack-gobi-pioneer-bracket-storage-lou-ky.html
