FS: Maggiolina Airlander RTT (project)

carbonsoup

New member
Long story, but I have to sell my Maggiolina Airlander to free up space in my garage. I bought this several years ago from a guy who rolled his landcruiser onto its side. I reglassed all the damage and replaced all the damaged hardware, however as life happens... I never was able to finish the project and I no longer have my Tacoma so I wouldnt even have a vehicle to put it on if I did finish.

So, this project needs to go to someone with new adventures. As it sits, the bottom is complete with new coat of truck bed liner) but the top will need the new head liner attached, all the fabric reattached and a coat of paint on the top. It has all the hardware, including ladder, foam mattress / sheets, winding handle and dome light.

It could be completed in a weekend. I might consider finish putting it together for an additional fee.

Located in Philadelphia, PA.
1500 bux as it sits.

I am mostly looking to move this out of my shop for cash but if you had a road worthy sailboat trailer capable of handling 6000 lbs, full keel Pearson Ariel....

matt
415.225.6177
 

Attachments

  • headliner.JPG
    headliner.JPG
    125.4 KB · Views: 71
  • serial.JPG
    serial.JPG
    116.2 KB · Views: 75
  • front qtr.JPG
    front qtr.JPG
    118.3 KB · Views: 97
Last edited:

carbonsoup

New member
a couple more... i have a ton more photos of the rebuild. and the last one is of the Airlander the day I got it.
 

Attachments

  • fabric.JPG
    fabric.JPG
    96.3 KB · Views: 58
  • inside bottom 2.JPG
    inside bottom 2.JPG
    104.8 KB · Views: 59
  • IMG_0978.jpg
    IMG_0978.jpg
    531.4 KB · Views: 68

carbonsoup

New member
btw, I have been following this forum for years and you guys have provided me with much valuable info as I camped from Baja to the Washington coast... wish I still had my Tacoma. (I will get another when the time is right.)
 

WMPhoto

Observer
Interested... But... $1500 is a lot for something that will take a lot of work to finish...
PM me if you can do a lot better.
 

carbonsoup

New member
i have someone interested, so I will let you know. however, these are 3-3.5k new and rarely go up for sale on the used market. I would consider finishing (paint and reassembly) if someone were not just pulling my leg.
 

Forum statistics

Threads
186,967
Messages
2,889,771
Members
227,526
Latest member
Maynerd Mowat
Top