OVRLND Camper - tundra 6.5' bed
Factory options:
Lift struts
Extra rear door room
Driver flip up hatch
Passenger flip up hatch
Extra bedding
Camper Jack mounts (experimental from Ovrlnd)
Rhino rack roof rails
Maxxair fan
3" bifold medium firm mattress
Lower 8020 rail
Headliner custom duck fabric
Extra reinforcement / structural members for propane/jerry can
At overland Jerry can mount
Propane mount
Awning mounts both sides
Solar port
Build out/heat:
Propex hs2800 with digital display + propane alarm
Co alarm
Dual outlet heat
Propex marine dual inlet/exhaust
Awnings:
Arb 2.0x2.5 with room
Ovs shower
Electrical:
Scanstrut usb port
Bluesea fuse/switch panel + disconnect
Renogy 160w flexible panel
Renogy pwm charge controller
LED dome lights on roof/flip up hatches
Lower camper led lights
Build out:
10+15 series 80/20 with lower front convertible bench to bed
1" rigid foam insulation on sides and roof
FRP panels
Front and rear blackout curtains with same headliner fabric
Does not include forward portion of bench/ but can supply the 8020 from it to finish that side.
Does not include dometic fridge
Located in Arvada, Co (Denver metro)
$13,500 obo
Willing to remove portions of build to lower cost (ie take out heater but leave all venting to allow for easy conversion to diesel heater)
Factory options:
Lift struts
Extra rear door room
Driver flip up hatch
Passenger flip up hatch
Extra bedding
Camper Jack mounts (experimental from Ovrlnd)
Rhino rack roof rails
Maxxair fan
3" bifold medium firm mattress
Lower 8020 rail
Headliner custom duck fabric
Extra reinforcement / structural members for propane/jerry can
At overland Jerry can mount
Propane mount
Awning mounts both sides
Solar port
Build out/heat:
Propex hs2800 with digital display + propane alarm
Co alarm
Dual outlet heat
Propex marine dual inlet/exhaust
Awnings:
Arb 2.0x2.5 with room
Ovs shower
Electrical:
Scanstrut usb port
Bluesea fuse/switch panel + disconnect
Renogy 160w flexible panel
Renogy pwm charge controller
LED dome lights on roof/flip up hatches
Lower camper led lights
Build out:
10+15 series 80/20 with lower front convertible bench to bed
1" rigid foam insulation on sides and roof
FRP panels
Front and rear blackout curtains with same headliner fabric
Does not include forward portion of bench/ but can supply the 8020 from it to finish that side.
Does not include dometic fridge
Located in Arvada, Co (Denver metro)
$13,500 obo
Willing to remove portions of build to lower cost (ie take out heater but leave all venting to allow for easy conversion to diesel heater)
Attachments
Last edited:
