Location: Aurora, Colorado
Asking price: was told by manufacturer that it is worth $1100, lets start there.
Description: Lets Go Aero Gear Wagon "turtle" trailer. Very roomy inside. Had the manufacturer recently fix the welds on the hinge joints for the rear half of the flip shell. They also installed brackets for securing the spare tire inside the trailer. Has two new tires and a very good spare. I will post a link to the manufactures website![000_0044.jpg 000_0044.jpg](https://expeditionportal.com/forum/data/attachments/63/63337-a0d0633a85233322ce18bca4aca1a981.jpg)
![000_0045.jpg 000_0045.jpg](https://expeditionportal.com/forum/data/attachments/63/63338-9bf29851e25798e3745e27c6368753c6.jpg)
![000_0046.jpg 000_0046.jpg](https://expeditionportal.com/forum/data/attachments/63/63339-05caa55ba1de63c231fb5348a616c32e.jpg)
for more info. Bear in mind that this is an earlier version of what is on the site. The manufacturer has since change axles to allow for a 14 inch tire (this is 13) and have changed the locks for the shell. The light are also old style bulbs not led. Other than that the are the same.
http://www.letsgoaero.com/ProductDetail.asp?Pid=2
known issues: as this is fiberglass composite there was some cracks starting to show in the hinge points for the shell, the manufacture installed washers to prevent cracks from spreading.
Asking price: was told by manufacturer that it is worth $1100, lets start there.
Description: Lets Go Aero Gear Wagon "turtle" trailer. Very roomy inside. Had the manufacturer recently fix the welds on the hinge joints for the rear half of the flip shell. They also installed brackets for securing the spare tire inside the trailer. Has two new tires and a very good spare. I will post a link to the manufactures website
![000_0044.jpg 000_0044.jpg](https://expeditionportal.com/forum/data/attachments/63/63337-a0d0633a85233322ce18bca4aca1a981.jpg)
![000_0045.jpg 000_0045.jpg](https://expeditionportal.com/forum/data/attachments/63/63338-9bf29851e25798e3745e27c6368753c6.jpg)
![000_0046.jpg 000_0046.jpg](https://expeditionportal.com/forum/data/attachments/63/63339-05caa55ba1de63c231fb5348a616c32e.jpg)
![100_1517.jpg 100_1517.jpg](https://expeditionportal.com/forum/data/attachments/63/63340-21b41fc68bda66bb105a735ff1416d03.jpg)
http://www.letsgoaero.com/ProductDetail.asp?Pid=2
known issues: as this is fiberglass composite there was some cracks starting to show in the hinge points for the shell, the manufacture installed washers to prevent cracks from spreading.