Geno_T10098
New member
Ok hello everyone. My name is Steve and im from just north of Boston Mass. Let me start off by saying im a total noob to the offroading scene but im learning quickly, so bare with me. I want to apologize i lost my pictures of what my truck looked like when i bought it.
Let me start with specs:
1998 T-100 SR5 4wd
3.4L V6
Rancho Shocks Front and Back
First Mod i did and justly so, is i upgraded my tires from my Toyo Open Counrty 265/75/r16 to some Definty M/T's same Measurements.
and then:
Next thing was to start on some bumpers, i Purchased a ARB Sahara Bar off of a forum, the only disadvantage was that it was off of a 2000 Nissan Pathfinder:
Before:
After 8 hours of modifications and cutting
sorry for the picture quality)
Next was i wanted to Make a rear bumper:
Before:
After:
(as you can see i havent gotten very far with this project, i need to get material and im planning on copying SAR_Squids design)
Let me start with specs:
1998 T-100 SR5 4wd
3.4L V6
Rancho Shocks Front and Back
First Mod i did and justly so, is i upgraded my tires from my Toyo Open Counrty 265/75/r16 to some Definty M/T's same Measurements.
![P1010552.jpg](http://i40.photobucket.com/albums/e242/sgenks/P1010552.jpg)
and then:
![P1010571.jpg](http://i40.photobucket.com/albums/e242/sgenks/P1010571.jpg)
Next thing was to start on some bumpers, i Purchased a ARB Sahara Bar off of a forum, the only disadvantage was that it was off of a 2000 Nissan Pathfinder:
Before:
![P1010555.jpg](http://i40.photobucket.com/albums/e242/sgenks/P1010555.jpg)
After 8 hours of modifications and cutting
![Image3.jpg](http://i40.photobucket.com/albums/e242/sgenks/Image3.jpg)
![P1010578.jpg](http://i40.photobucket.com/albums/e242/sgenks/P1010578.jpg)
![P1010580.jpg](http://i40.photobucket.com/albums/e242/sgenks/P1010580.jpg)
![P1010576.jpg](http://i40.photobucket.com/albums/e242/sgenks/P1010576.jpg)
Next was i wanted to Make a rear bumper:
Before:
![P1010547.jpg](http://i40.photobucket.com/albums/e242/sgenks/P1010547.jpg)
After:
![P1010590.jpg](http://i40.photobucket.com/albums/e242/sgenks/P1010590.jpg)
(as you can see i havent gotten very far with this project, i need to get material and im planning on copying SAR_Squids design)
Last edited: