offroad_nomad
Adventurer
is it really necessary to remove the paint from the two metal surfaces I want to join with JB Weld? Thanks.
JB Weld
- Thread starter offroad_nomad
- Start date
njtaco
Explorer
Only if you want it to stick...
Seriously, which specific JB product, and what are you using it for?
The quality of the adhesion is very dependant on the prep, and sticking to paint means it will only hold as well as the paint does. If the paint flakes, the parts...part.
Seriously, which specific JB product, and what are you using it for?
The quality of the adhesion is very dependant on the prep, and sticking to paint means it will only hold as well as the paint does. If the paint flakes, the parts...part.
Last edited:
offroad_nomad
Adventurer
it's kind of hard to describe, but I'll give it a shot. well I'm running ideas through my mind for my tablet pc mount base. It doesn't appear RAM makes a base that mounts to the seat bolts for '01 4Runners, only '03 and newer.
I was thinking of bending a piece of aluminum sheet like a backwards "7" and JB Weld it to the transmission hump (the hump is painted). A quick disconnect RAM base would be bolted on top, then a 12" or so RAM pole, articulating arm and tablet holder.
I was thinking of bending a piece of aluminum sheet like a backwards "7" and JB Weld it to the transmission hump (the hump is painted). A quick disconnect RAM base would be bolted on top, then a 12" or so RAM pole, articulating arm and tablet holder.
offroad_nomad
Adventurer
Your tack welding some nuts suggestion is an imaginative idea. Thanks.
erin said:
