Jeep XJ 4.10 gears D30/8.25 & D30 carrier, overhead console, OEM roof rack bars, etc

[katuah]

Jeep XJ 4.10 gears D30/8.25 & D30 carrier, overhead console, OEM roof rack bars, etc

Selling - Used 4.10 gears. Dana 30, Chrysler 8.25. Also a 3.73+ carrier for the D30.

I bought these gears a while back from FrankZ on NAXJA. They were in his son's XJ for a little while until he got bitten by the bigger bug. Frank says they are Dana (front) and Yukon (rear). Frank also told me this: "The teeth in the ring gear have already been ground down to allow for removal/installation of the crosspin. Comes in handy if you decide to install a lunchbox locker at some point since you won't have to pull the carrier and ring gear to install it. Pay attention to this area when bolting the ring gear to the carrier." I bought the carrier separately from a guy on JeepForum. Does NOT include install kits. I just decided I don't have time or inclination (or tools, or help...) to do my own gears anytime soon, and there's no point in letting these sit in the closet.

$175 for the whole regearing set. Will sell separately for $75/gear set, $40 carrier.

Also have a 97-01 overhead console, matches light grey interior. $50 or make offer.

Also have a pair of stock XJ roof rack crossbars, and stock diff covers for a D30 and Chrysler 8.25. Free to a good home.

I'll ship anything on your dime, or come get it. I'm in Durham. The Carolina one, not the UK one. Also open to trades.

Yes, StumpXJ, you have seen this ad before.

 

[expeditionxj]

Are the Dana 30 gears for a LP or HP Dana 30?

Sent from my DROID RAZR using Tapatalk 2

 

[JeepinMt]

Can you send me a pic of the OHC? Very interested

 

[pconrad]

Overhead console for sale

Hi
Is it still for sale?

Does it have the wiring loom and temperture sensor?

Thank you

Selling - Used 4.10 gears. Dana 30, Chrysler 8.25. Also a 3.73+ carrier for the D30.

I bought these gears a while back from FrankZ on NAXJA. They were in his son's XJ for a little while until he got bitten by the bigger bug. Frank says they are Dana (front) and Yukon (rear). Frank also told me this: "The teeth in the ring gear have already been ground down to allow for removal/installation of the crosspin. Comes in handy if you decide to install a lunchbox locker at some point since you won't have to pull the carrier and ring gear to install it. Pay attention to this area when bolting the ring gear to the carrier." I bought the carrier separately from a guy on JeepForum. Does NOT include install kits. I just decided I don't have time or inclination (or tools, or help...) to do my own gears anytime soon, and there's no point in letting these sit in the closet.

$175 for the whole regearing set. Will sell separately for $75/gear set, $40 carrier.

Also have a 97-01 overhead console, matches light grey interior. $50 or make offer.

Also have a pair of stock XJ roof rack crossbars, and stock diff covers for a D30 and Chrysler 8.25. Free to a good home.

I'll ship anything on your dime, or come get it. I'm in Durham. The Carolina one, not the UK one. Also open to trades.

Yes, StumpXJ, you have seen this ad before.

 

[katuah]

Sorry for the delays, I don't get emails when y'all post here.

Expedition XJ, I had another question on that from another forum, and after some flailing on my part and research, I can say: They are reverse-cut gears, which should work in older LP and mid-years HP XJ Dana 30 axles, but will NOT work in the late-years XJ HP Dana 30s because those run the "standard" (not reverse) cut gears.

I've got a local guy who wants the OHC, we have been missing each other the last 2 weekends due to weather, but it will likely be gone soon unless he bails after he sees it! In which case, I'll have a LOT of PM's to return, both here and on other forums.

pconrad, the overhead console is just and only that - I did not grab any extra wires as that would have involved tearing the headliner out of the vehicle being parted out, and I couldn't do that. It has all the "stuff" that was in the original console - circuit boards of stuff! - but even if that was what you wanted, I doubt you'd want to pay what it would cost to ship the thing to Canada. :-O

 

[Nathant78]

sent PM