LP quick disconnect for Propex H2211

[Mark2457]

Anyone found a fitting to go from Propex to rubber hose with LP disconnect? I think it’s a 5/16 female to 1/4 LP female. I want to use LP quick disconnect from regulator to LP female.

The 20# propane tank will be on outside of trailer and I want a QD to connect for the gas line that runs to the Propex H2211 that’s mounted under the trailer

Thanks

Mark

 

[john61ct]

Ideally take both ends into a proper propane shop, get them to order from the RegO catalog.

Too much crap Chinese out there

otherwise ask these guys: https://www.ebay.com/str/propanekits

 

[joeyumbra]

I used these on mine.

 

[Alloy]

These are what I use. It requires the valve to be closed to connect/disconnect.

Model3/375 3/8" Natural Gas Quick Connect | MB Sturgis

Integral Ball Valve Natural Gas Quick Disconnect including a Thermal Shut-off Device used for quick connecting indoor & outdoor gas appliance to a fixed gas supply line. Includes Couple Safe Technology Thermal Shut-off Device Protection. Designed to only allow gas line connection when the valve...

mbsturgis.com

A propane tank is high (300psi) pressure and the Propex is low (0.5psi) pressure so a 2 stage regulator is needed.

NEVER put a QD inside because O rings leak.

Hard ( 3/8"copper) pipe (not hose) the propane line from the Propex to the outside.

Use a combustible gas detector with the sensor at the lowest point gas may collect

 

[Alloy]

Ideally take both ends into a proper propane shop, get them to order from the RegO catalog.

Too much crap Chinese out there

otherwise ask these guys: https://www.ebay.com/str/propanekits

Link is for liquid propane systems for vehicles.

 

[john61ct]

I just meant the seller