Lumberjack
Adventurer
Millermatic DVI Welder $1,150.00 SOLD!
Other Photo's Here: http://s291.photobucket.com/albums/ll296/LumberjackJeep/For Sale/
Location: Sparks, NV
110 or 220 volt Single Phase
Less than 20hrs on unit
Also Includes:
Dual Cylinder Rack
Spoolmate 3035 Spool Gun (aluminum capable) NEW Still in Packaging
Regulator & Gas Hose
Leather Gloves
Welding Pliers
Plastic Tool Box
Wire Brush
Slag Hammer (Not needed with MIG, came with kit?)
25’ 220v Heavy Duty Extension Cord
Spare Tips
Startup Video
.035 Wire Spool (What’s Left)
http://www.millerwelds.com/about/news_releases/2004_archive/articles116.html
http://www.millerwelds.com/products/replacement_guide/pdf/DC12-52.pdf
http://www.millerwelds.com/products/wire_feeders/spoolmate_3035/
Jackson Welding Helmet - EQC Variable Shade Auto Dark Lens w/HSL 100
Variable Shade 9-12
• 4½” x 5¼” cartridge size with approximately 6 square inch viewing area
• Shade 4.0 clear state for hood-down set up
• On switch with auto-off feature automatically turns the unit off after approximately 20 minutes of non-use
• Sensitivity adjustment allows user to adjust the unit depending on ambient light or arc intensity
• Variable shade version includes a “dark to clear” delay adjustment which allows user to adjust for tack welding or bright residual weld pool.
Features
EQC Technology
Lens Speed: 1/25,000 sec
1 3/4" X 3 3/4" viewing area
On/Off switch w/Auto-Off
Sensitivity Adjustment
2 Independent, redundant sensors
Uses 2 AAA batteries
Low voltage indicator light
Variable shade 9-12
I used this welder to glue my Jeep back together after I cut it apart to stretch it 15”. Since our move to Nevada and living in an apartment, my days of major fab work is on hold until we end up in a house with a shop… Right now I have no clue when this will happen, if ever again
… so I offer up one of my favorite tools, The Hot Glue Gun. It is one of the handiest tools I have ever used in the shop.
Dennis
Other Photo's Here: http://s291.photobucket.com/albums/ll296/LumberjackJeep/For Sale/
Location: Sparks, NV
110 or 220 volt Single Phase
Less than 20hrs on unit
Also Includes:
Dual Cylinder Rack
Spoolmate 3035 Spool Gun (aluminum capable) NEW Still in Packaging
Regulator & Gas Hose
Leather Gloves
Welding Pliers
Plastic Tool Box
Wire Brush
Slag Hammer (Not needed with MIG, came with kit?)
25’ 220v Heavy Duty Extension Cord
Spare Tips
Startup Video
.035 Wire Spool (What’s Left)
http://www.millerwelds.com/about/news_releases/2004_archive/articles116.html
http://www.millerwelds.com/products/replacement_guide/pdf/DC12-52.pdf
http://www.millerwelds.com/products/wire_feeders/spoolmate_3035/
Jackson Welding Helmet - EQC Variable Shade Auto Dark Lens w/HSL 100
Variable Shade 9-12
• 4½” x 5¼” cartridge size with approximately 6 square inch viewing area
• Shade 4.0 clear state for hood-down set up
• On switch with auto-off feature automatically turns the unit off after approximately 20 minutes of non-use
• Sensitivity adjustment allows user to adjust the unit depending on ambient light or arc intensity
• Variable shade version includes a “dark to clear” delay adjustment which allows user to adjust for tack welding or bright residual weld pool.
Features
EQC Technology
Lens Speed: 1/25,000 sec
1 3/4" X 3 3/4" viewing area
On/Off switch w/Auto-Off
Sensitivity Adjustment
2 Independent, redundant sensors
Uses 2 AAA batteries
Low voltage indicator light
Variable shade 9-12
I used this welder to glue my Jeep back together after I cut it apart to stretch it 15”. Since our move to Nevada and living in an apartment, my days of major fab work is on hold until we end up in a house with a shop… Right now I have no clue when this will happen, if ever again
… so I offer up one of my favorite tools, The Hot Glue Gun. It is one of the handiest tools I have ever used in the shop.Dennis
Last edited:
