Blizz
Observer
Hello,
Just wanted to show you the reason for selling my '94 Toyota 4Runner 3.0TD SASed w/35's, lockers, etc.
Thats my '93 Toyota Land Cruiser HDJ80 4.2TD. It's a 12 valve, so 1HD-T engine, but for me the best version, one of the lasts 12v, so it has the bigger brakes, ABS, etc. (It's like a FZJ except for the dash and the airbags).
We name it "Copito" that means "Flake", it's white like a snow flake hehe
It has an OEM snorkel, Webasto ThermoTop C heater, leather, sunroof, the three lockers, caster kit, steering damper, lifted and 285's.
Since I have it I've done it CDL switch, 7-pin mod, a complete axle rebuilt with some reinforcements:
Replaced the big end bearings, a common problem with those. They were very bad but the crankshaft and piston rods where in mint condition. I put the ACL ones and obviously new oil filter and Mobil 10W40 oil.
Also installed my Clarion head unit (I'll put the rest of my car audio system in a future) and mi TTI CB transceiver.
Used an old mobile phone antenna hole to put the aerial
Then I bought a 40l compressor fridge, as I hadn't any place to secure it I had an excuse to build my drawer system...
Plenty space to put the 3rd battery, tool box and compressor.
Used some European boxes, 2+2 on the left and center spaces and one bigget but lower on the right side.
Added some hinges to the boxes
Did the left side cover
Put some stailess steel awning hinges
And some locks to keep the boxes in place
Right side space is being left with no cover so I can keep my foldable chairs there
If you were wondering, the thing above the taller boxes is a foldable camp table.
Now I've to put some alu corner profiles, build a cargo barrier and a fridge slide.
I also build a Beta version of a dash device holder. Next one will be with bends so it follows the dash shape. I use a RAM mount motorbike 1'' support to hold my Garmin 276c.
Just wanted to show you the reason for selling my '94 Toyota 4Runner 3.0TD SASed w/35's, lockers, etc.
Thats my '93 Toyota Land Cruiser HDJ80 4.2TD. It's a 12 valve, so 1HD-T engine, but for me the best version, one of the lasts 12v, so it has the bigger brakes, ABS, etc. (It's like a FZJ except for the dash and the airbags).
We name it "Copito" that means "Flake", it's white like a snow flake hehe
It has an OEM snorkel, Webasto ThermoTop C heater, leather, sunroof, the three lockers, caster kit, steering damper, lifted and 285's.
Since I have it I've done it CDL switch, 7-pin mod, a complete axle rebuilt with some reinforcements:
Replaced the big end bearings, a common problem with those. They were very bad but the crankshaft and piston rods where in mint condition. I put the ACL ones and obviously new oil filter and Mobil 10W40 oil.
Also installed my Clarion head unit (I'll put the rest of my car audio system in a future) and mi TTI CB transceiver.
Used an old mobile phone antenna hole to put the aerial
Then I bought a 40l compressor fridge, as I hadn't any place to secure it I had an excuse to build my drawer system...
Plenty space to put the 3rd battery, tool box and compressor.
Used some European boxes, 2+2 on the left and center spaces and one bigget but lower on the right side.
Added some hinges to the boxes
Did the left side cover
Put some stailess steel awning hinges
And some locks to keep the boxes in place
Right side space is being left with no cover so I can keep my foldable chairs there
If you were wondering, the thing above the taller boxes is a foldable camp table.
Now I've to put some alu corner profiles, build a cargo barrier and a fridge slide.
I also build a Beta version of a dash device holder. Next one will be with bends so it follows the dash shape. I use a RAM mount motorbike 1'' support to hold my Garmin 276c.
