Selling a new trailer that is a custom build. I like the M416 Trailer but don't like the idea of constantly looking for ones that are in decent shape so I decided to build one myself as there doesn't appear to be any/many manufacturers (that I found) that build camper trailers in the M416 Style. I call it a camper trailer but it can also be used as a utility trailer when the need arises.
The shape of the trailer is inspired by the M416 but other than that its a custom build. Dimensions drawn on attached pics.
Location is Dallas, TX. May be willing to deliver. Everything's negotiable.
Price: $9,950 OBO
The shape of the trailer is inspired by the M416 but other than that its a custom build. Dimensions drawn on attached pics.
- The entire body and lid are made out of 14 gauge sheet steel (M416s were usually 16 gauge...thinner). The floor is 14 gauge diamond-plate steel.
- Frame rails are 3" steel C-channel that are in one continuous piece from the rear and meet and the tongue
- 3500 lb trailer axle
- Tongue receiver is 3" steel C-Channel with multiple attachment points. Hitch coupler is a standard 2" coupler but can be swapped-out for a lunette-eye or other coupler
- Tires are Falken Rubitrek A/T 31x10.50R15
- Lid has pneumatic assist for opening and closing. Lid can be opened with a RTT mounted (not while RTT is open) on the lid rack. Pneumatic lifters are easily sourced and replaceable should you need to increase/decrease the lift assistance
- Tailgate opens flush with floor of cargo area. Tailgate allows access to cargo area if rack mounted RTT is open
- 2" hitch receiver on rear of trailer
- Not for towing. Can be used for hitch-mounted accessories (bike carrier, tire carrier, cargo carrier, etc)
- Rear stabilizer jacks
- Custom-made tent rack with side mounting rails
- Tent rack is bolt-on. Can easily be removed if desired
- E-Track tie-down rail system on both interior sides and front interior side of trailer (not on tailgate)
- Lockable toolbox/cargo box (wiring box is located in the toolbox)
- Standard trailer tongue jack
- Lid and tailgate can be locked with a padlock (not provided)
Location is Dallas, TX. May be willing to deliver. Everything's negotiable.
Price: $9,950 OBO
