Pictures of your Tacoma Access Cab Fridge Installations

[sierrahsky]

I am going to get a fridge for my truck but I have an 09 Access cab with Sub and would like to see how they fit before I buy. I cant put in the bed so my only option is the rear passenger seat. I dont want to remove the speaker and would like to see if the 37 will fit. Please post pics soon. Thanks Josh

 

[sierrahsky]

Bump

 

[Tim A]

I don't have a fridge so I can't help you w/ pics.

I've removed one of my rear seats and made a platform for my dog (got the idea from TacomaWorld) I can get pics if you want...

If you removed the rear seats, that may allow you to construct a custom (i.e. flat) platform to place/tie down your fridge.

 

[sierrahsky]

I don't have a fridge so I can't help you w/ pics.

I've removed one of my rear seats and made a platform for my dog (got the idea from TacomaWorld) I can get pics if you want...

If you removed the rear seats, that may allow you to construct a custom (i.e. flat) platform to place/tie down your fridge.

My problem is I have the stock Toyota subwoofer and I am worried the fridge won't fit in the back. I am 6 foot 4 so moving my seat forward isn't an option.

 

[Tim A]

OK yeah I'm not familiar with that sub. Good luck with your fridge install!

 

[sierrahsky]

Thanks. I am prob going to do it any way and just put a post after but it would be nice to know it can be done b4 I start

 

[flyingwil]

I sent Aaron a PM, hope he posts up.

 

[sierrahsky]

I sent Aaron a PM, hope he posts up.

Thank wil, I want to get going on this if it will fit.

 

[XPEDITIONREADY]

Just get alittle creative, if the fridge wont fit with the sub, move the sub to one side or the other of the back of the cab. Wont be hard to make another enclosure if need be.

 

[sierrahsky]

Just get alittle creative, if the fridge wont fit with the sub, move the sub to one side or the other of the back of the cab. Wont be hard to make another enclosure if need be.

Well the issue is we are going to do 2 mounts, 1 per vehicle. Also I want to keep the truck in a way that we can always remove items depending on the trip type. This method has served me very well for the last couple of years of running my huskies so we would like to stay with it.

I believe that the 37 will fit width and height perfectly, and the sub only sticks out about 5 - 6 inches so my hope is that in the worst case scenario I would just remove the back seats (never used) and mount it there on the passenger side. Plus my girl is only 5"6 so she doesnt need all that room.

 

[sierrahsky]

Well today I started with the welding for the frame to support the weight, removed the sub, seats and head rests, removed center storage console and prepped wiring platform. I spent almost 5 hours and its cold! I will be painting & drilling holes tomorrow, cutting wood platform, and finishing the new fuse block install tomorrow.

 

[sierrahsky]

Alright well today I did 90% of the wiring and finished the wood work. I also installed the fuse block with the new fuse.

 

[sierrahsky]

almost done

 

[sierrahsky]

Well I am in the process of carpeting and installing the final pieces. I should have finished pictures up today.


!!:wings:

 

[sierrahsky]

Finished