Plug N Play trailer wiring kit for an 80?

[Schattenjager]

Now that MoGas has me squared away with installing the pintle / ball on the Cruiser, I'm looking for a plug and play wiring kit for trailer lights etc. NAPA is willing, but not much help - they tell me the Cruiser has a wiring harness ready to plug a kit into without the need for any splicing. Their computer here list three erroneous part numbers for the kit and they have thrown their hands up having no idea how to proceed.

Can anyone point me in the right direction, if such a thing actually exists?

 

[Douglas S.]

This should work: http://store.4wheelauto.com/view_product.php?product=5144

 

[MoGas]

This is the one that I used. Hopkins 43405

 

[Schattenjager]

This is the one that I used. Hopkins 43405

Great price. Does it work on the round coupling as well as the flat connector?

 

[MoGas]

The one that I use has the 7 round and a 4 flat built together this is the best photo I could find of the rear of my rig.

This is the one that I use.

It has a plug in the back to plug the 4 flat from my trailer harness in to, and it powers the trailer lights for the 7 round outlet, too. If I want to power the remaining pins in the 7 round, I will have to wire up a brake controller and hot wire to it. I haven't had the need, so I haven't done that yet. The outlet has pigtails already for trailer power and electric brakes, so you don't have to tear into the socket.


Dave

 

[Schattenjager]

Dave, you are underpaid.