Roof Lights

[bmxer06pa]

I recently purchased some new hella lights, and tomorrow i am going to put them on my roof. i was wondering how everyone out there with disco 2's runs the wires off of their roofs to under the hood?
thanks
doug

 

[jgdisco2]

i ran mine down through the A pillar but now that i have a snorkel im probably gonna rewire it down the snorkel instead. the A pillar is a pain to get back on the windshield

 

[davekb3ejw]

i ran mine down both sides of the a pillars.

2 sets of lights down the one side and the other 2 down the other side.

 

[achampagne]

I have this same mod coming up, and would love to see more shots and ideas as well, the more detailed the better.

 

[R_Lefebvre]

I ran mine down inside the A pillar trim as well. There's not much to it.

 

[leeawalden]

drill a hole in the top of the apillar gutter and run the wires down with a coat hanger. slap some silicone on there and your done. I used a trailer wiring harness so I could disconnect them and pull the rack and lighst off if I want. You can pull the whole a pillar plastic off but its a pain to get back on and you will probably have to buy new plastic trim clasps or whatever you call them...youll probably break a few.