Clutch
<---Pass
Sometimes there is never a good place to hang my shower shelter.
So I made one.
I used 2 half inch square stock tack welded together, it just happens to fit perfectly into my Thule rack. Then I drilled a small hole on the end cap so a bicycle shifter cable slips through, then used epoxy to affix the cable to the 1/2" stock. So, when I pull off the endcap the rod will pull out.
http://outdoors.webshots.com/photo/2617613000093498191TUltxf
So I made one.
I used 2 half inch square stock tack welded together, it just happens to fit perfectly into my Thule rack. Then I drilled a small hole on the end cap so a bicycle shifter cable slips through, then used epoxy to affix the cable to the 1/2" stock. So, when I pull off the endcap the rod will pull out.
http://outdoors.webshots.com/photo/2617613000093498191TUltxf
Last edited: