mr.unproductivity
New member
For sale is a 2018 Grandby Shell and I am the original owner. I have been working on redoing the interior of the camper and it is sold as-is. Please read the description below and reach out if you have any questions.
I had an unplanned life event and I am unable to finish this project. For the future owner I will be available to answer questions and provide build pictures showing the previous construction and wiring.
Price: $7,500
Location: Charlotte, NC
Description:
2018 FWC Grandby Shell with the following options:
Yakima Roof Tracks
Propane Furnace
Queen Pullout Bed
Floor Jacks
2x Propane Tanks
I am including the following additional items:
2x Hightec Solar 200w panels ready to be mounted to the roof
Victron charge controller and battery monitor
Unused portipotty and blue tablets
2x Blue Sea disconnect switches
16x16 sink
DC water pump
Digital Thermostat
Rolling tray for the camper
The exterior structure of the camper has not been modified and works perfectly.
The camper has been stored in my garage with the canvas up when not in use.
I have made the following modifications:
Interior was stripped to remove walls and access insulation. All joints of the foam insulation and the aluminum structure have been taped with reflective tape.
The interior walls have been waterproofed and Formica has been bonded to the wall to make an easy wipe down surface. Some of the interior screws and trim as been painted black to better match the white walls.
I added a roof vent fan.
The camper is ready for cabinets/instillation of the battery and wiring.
It's unfortunate that I can't finish this, but I hope the next owner gets as much enjoyment from it as I have.
Please PM me for any questions.
Thank you.
I had an unplanned life event and I am unable to finish this project. For the future owner I will be available to answer questions and provide build pictures showing the previous construction and wiring.
Price: $7,500
Location: Charlotte, NC
Description:
2018 FWC Grandby Shell with the following options:
Yakima Roof Tracks
Propane Furnace
Queen Pullout Bed
Floor Jacks
2x Propane Tanks
I am including the following additional items:
2x Hightec Solar 200w panels ready to be mounted to the roof
Victron charge controller and battery monitor
Unused portipotty and blue tablets
2x Blue Sea disconnect switches
16x16 sink
DC water pump
Digital Thermostat
Rolling tray for the camper
The exterior structure of the camper has not been modified and works perfectly.
The camper has been stored in my garage with the canvas up when not in use.
I have made the following modifications:
Interior was stripped to remove walls and access insulation. All joints of the foam insulation and the aluminum structure have been taped with reflective tape.
The interior walls have been waterproofed and Formica has been bonded to the wall to make an easy wipe down surface. Some of the interior screws and trim as been painted black to better match the white walls.
I added a roof vent fan.
The camper is ready for cabinets/instillation of the battery and wiring.
It's unfortunate that I can't finish this, but I hope the next owner gets as much enjoyment from it as I have.
Please PM me for any questions.
Thank you.
