I am selling my used AEV Rear Bumper, Tire Carrier and Auxiliary Fuel Caddy. Overall it is an excellent kit for bring all of your weight off of the stock tailgate. The kit is an easy way to pack out an extra 10 gallons of fuel and a great place to put your Hi-Lift. There is some wear from the trail but the powder coat is holding up well, the tank doesn't leak, and the tire carrier is fully greased and swings smoothly. I am not looking to part the kit out.
$1000 for the full kit; PayPal or cash.
Local Pick up in the Mount Vernon, Washington area only. The fuel caddy cannot be shipped and freight on the tire carrier is extremely expensive.
Included are the following components with links:
AEV Rear Bumper for Wrangler JL: https://www.quadratec.com/p/aev/rx-rear-bumper-wrangler-jl-12302000ac
AEV Tire Carrier https://www.quadratec.com/p/aev/rx-rear-bumper-tire-carrier-wrangler-jl-12302500aa
AEV Fuel Caddy https://www.quadratec.com/products/12049_2101_07.htm
Also included is the shaker siphon.
AEV Flare Extensions https://www.quadratec.com/p/aev/rx-rear-bumper-flare-extensions-wrangler-jl/high-12302020aa
The Flare Extensions also have Rok Blox XL mudflaps attached. They are removable if desired.
AEV Backup Light Mount https://www.quadratec.com/p/aev/rx-rear-bumper-backup-light-mount-wrangler-jl-12302015aa
AEV Hi-Lift and Pull-Pal Mount https://www.quadratec.com/products/12049_2005_07.htm
AEV Hi-Lift Base https://www.quadratec.com/p/aev/road-jack-base-jeep-wrangler-jl
All mounting hardware, minus the long bolt to hold on the tire carrier and the reverse sensor brackets. I still have the short bolt which supports up to 5.5" of backspacing.
All in all a $3,206 value *before* you pay shipping and tax.
Not included is the CHMSL plastic bracket. I have lost one on the trail and strongly recommend *any* other CHMSL solution to the AEV one.
$1000 for the full kit; PayPal or cash.
Local Pick up in the Mount Vernon, Washington area only. The fuel caddy cannot be shipped and freight on the tire carrier is extremely expensive.
Included are the following components with links:
AEV Rear Bumper for Wrangler JL: https://www.quadratec.com/p/aev/rx-rear-bumper-wrangler-jl-12302000ac
AEV Tire Carrier https://www.quadratec.com/p/aev/rx-rear-bumper-tire-carrier-wrangler-jl-12302500aa
AEV Fuel Caddy https://www.quadratec.com/products/12049_2101_07.htm
Also included is the shaker siphon.
AEV Flare Extensions https://www.quadratec.com/p/aev/rx-rear-bumper-flare-extensions-wrangler-jl/high-12302020aa
The Flare Extensions also have Rok Blox XL mudflaps attached. They are removable if desired.
AEV Backup Light Mount https://www.quadratec.com/p/aev/rx-rear-bumper-backup-light-mount-wrangler-jl-12302015aa
AEV Hi-Lift and Pull-Pal Mount https://www.quadratec.com/products/12049_2005_07.htm
AEV Hi-Lift Base https://www.quadratec.com/p/aev/road-jack-base-jeep-wrangler-jl
All mounting hardware, minus the long bolt to hold on the tire carrier and the reverse sensor brackets. I still have the short bolt which supports up to 5.5" of backspacing.
All in all a $3,206 value *before* you pay shipping and tax.
Not included is the CHMSL plastic bracket. I have lost one on the trail and strongly recommend *any* other CHMSL solution to the AEV one.