BurbanAZ
Explorer
I have tried a few different mounts and arrangements over the years and have found things that I liked and hated about each way I tried.
I'm sure someone else has tried this, but I am mounting an iPad and a GPS unit in my 4Runner and decided to slightly modify some Go Pro mounts. By using a Go Pro mounting system it opens a lot of options for accessories, plus I know the Go Pro mounts are very good quality. I know the 3m tape is insanely strong so I'm thinking it should be enough for the iPad and garmin. Plus the way I figured, if it doesn't work and the tape fails or something then I can try something else since I'm not drilling holes or anything.
I found that to make it so I have a sticky attachment point on both ends I needed to cut one of the pieces off of the 3 side and file it down a tiny bit to fit.
![image.jpg image.jpg](https://expeditionportal.com/forum/data/attachments/221/221120-3cc4e134e4d962aa8b3dfc753ad4c9fa.jpg)
![image.jpg image.jpg](https://expeditionportal.com/forum/data/attachments/221/221121-c708f6a4427fdbcb02d892c9811925c3.jpg)
After modifying the mounts a little bit everything else just connects like it's designed to
![image.jpg image.jpg](https://expeditionportal.com/forum/data/attachments/221/221122-4a3a8ed9b7d766176a209db49da28088.jpg)
The I just picked where I wanted each unit mounted, prepped the surface and stuck the mount on.
![image.jpg image.jpg](https://expeditionportal.com/forum/data/attachments/221/221123-98e9f0aaf06988c0a153fff583d1aef9.jpg)
![image.jpg image.jpg](https://expeditionportal.com/forum/data/attachments/221/221124-63f699018c34145a383910fc2ff665a8.jpg)
We're going on a trip for a few days tomorrow, so we'll see how they hold up
I'm sure someone else has tried this, but I am mounting an iPad and a GPS unit in my 4Runner and decided to slightly modify some Go Pro mounts. By using a Go Pro mounting system it opens a lot of options for accessories, plus I know the Go Pro mounts are very good quality. I know the 3m tape is insanely strong so I'm thinking it should be enough for the iPad and garmin. Plus the way I figured, if it doesn't work and the tape fails or something then I can try something else since I'm not drilling holes or anything.
I found that to make it so I have a sticky attachment point on both ends I needed to cut one of the pieces off of the 3 side and file it down a tiny bit to fit.
![image.jpg image.jpg](https://expeditionportal.com/forum/data/attachments/221/221120-3cc4e134e4d962aa8b3dfc753ad4c9fa.jpg)
![image.jpg image.jpg](https://expeditionportal.com/forum/data/attachments/221/221121-c708f6a4427fdbcb02d892c9811925c3.jpg)
After modifying the mounts a little bit everything else just connects like it's designed to
![image.jpg image.jpg](https://expeditionportal.com/forum/data/attachments/221/221122-4a3a8ed9b7d766176a209db49da28088.jpg)
The I just picked where I wanted each unit mounted, prepped the surface and stuck the mount on.
![image.jpg image.jpg](https://expeditionportal.com/forum/data/attachments/221/221123-98e9f0aaf06988c0a153fff583d1aef9.jpg)
![image.jpg image.jpg](https://expeditionportal.com/forum/data/attachments/221/221124-63f699018c34145a383910fc2ff665a8.jpg)
We're going on a trip for a few days tomorrow, so we'll see how they hold up