aftermarket coil springs?

You said you don't think the 882 would give you 2.5 inch lift. But with 882 and 5100. You probably can max the 5100 and get 3 plus inch lift but imo. I think 2.5 is max safe lift for cv. I know a lot of people rock out 3 inches but I'm sure they are tearing boots or have axle issues more than if they left it 2.5


Sent from my iPhone using Tapatalk

I do not want to go over 2.5" because of the CVs. I know people have done it with the Eibachs and used a diff drop kit. But, I don't want to do that, either. Plus, I dont have armor on the front, yet and don't want to deal with the harsh ride

Sent from my SM-T700 using Tapatalk
 
I do not want to go over 2.5" because of the CVs. I know people have done it with the Eibachs and used a diff drop kit. But, I don't want to do that, either. Plus, I dont have armor on the front, yet and don't want to deal with the harsh ride

Sent from my SM-T700 using Tapatalk

Set the 5100 to 1.25 lift and run OME 880 which gives 1.25-1.75 lift. This is your closest bet


Sent from my iPad using Tapatalk
 
Combine will give you 2.50-2.75 lift in which what you wanted. Ahh I give up.


Sent from my iPhone using Tapatalk
Sorry, read the post early this morning. Was still waking up. I see what your saying now. . I guess, I didn't fully read what you wrote. I think that's what I'll do.
Combine will give you 2.50-2.75 lift in which what you wanted. Ahh I give up.


Sent from my iPhone using Tapatalk

Combine will give you 2.50-2.75 lift in which what you wanted. Ahh I give up.


Sent from my iPhone using Tapatalk


Sent from my SM-T700 using Tapatalk
 

Forum statistics

Threads
190,906
Messages
2,930,095
Members
234,780
Latest member
Dynamo TCX

Members online

Top