aequitas3
I'm a truck…
According to that website, there should be some type of label or stamp in the window or window frame. I looked several times all over on my 2015 Flippac. I found nothing.
Flip-Pac Parts Suppliers List? Windows, Torsion Bars, etc.
- Thread starter ET1251
- Start date
aequitas3
I'm a truck…
I just spoke with Brian at Sway Away, who make a replacement torsion bar. They are working on replacement hinges and expect a prototype in about a month. Everything will be the same with regards to the splines so that it is backwards compatible, but they "are fixing the other problems with the hinge at the same time".
Also, the Sway-A-Way FlipPac Torsion Bar was powdercoated red for the first two batches. Subsequent (newer, including the current) batches are powdercoated silver/gray.
Also, the Sway-A-Way FlipPac Torsion Bar was powdercoated red for the first two batches. Subsequent (newer, including the current) batches are powdercoated silver/gray.
abiker
Member
Can you link these quick disconnects? And include a description or something in case the link dies? I'm sure a ton of people would love to know about these!
97jeeperdrummer
New member
I am in the same situation, my rear frame was destroyed and I'm finding it impossible to get a replacement. Any luck for either of you guys?
Did a quick little mod today which I should have done a long time ago, anyone with a filppac knows that the poles are a pain in the *** and they will hit any low hanging tree and I've broken both of them off numerous times. So I added Bimini Quick Disconnects, ignore how dirty the flippac is lol.
It's a very easy mod to do, just take off your old pole supports (front and back):
All you have to do is drill one new hole and seal up all the holes with silicon and mount the bimini bottom:
Next up is modding the poles, I used SS bimini eye ends on the flippac side and plastic eye ends on the fender side:
It's a very easy mod to do, just take off your old pole supports (front and back):
All you have to do is drill one new hole and seal up all the holes with silicon and mount the bimini bottom:
Next up is modding the poles, I used SS bimini eye ends on the flippac side and plastic eye ends on the fender side:
Do you know where to find the nylon splined torsion bar/hinge bushings? I was talking to an Eric at swayaway Feb 2017 and he said they weren't going to make them.
pengrey1
New member
hi all! I know this thread is getting a bit old, but I'm in search for side window replacements for my flippac. Having trouble with mine. I can't seem to locate any manufacturer name or number on the frame anyplace. Anybody have any luck searching for these? Any info greatly appreciated.
You should be able to order window replacements from any truck shell retailer. All they need is the size and the angle of the trapezoid shape I believe. I did this with a non-Flippac shell one.
I finally ordered some nylon bushings and end collars for the torsion bar. Swayaway now offers a complete hinge replacement package with these parts included.
WOODY2
Adventurer
If you want I could take a pic or two.
Hey guys! I posted in the owners thread as well, but maybe this is a better place.
I need to replace the tent frame, but the sizing seems tricky. I know it's based on a bimini top but the frame is much larger than the sizes I can see, and the frame pieces are separate rather than linked together.
Can any of you point me to replacement tent frame parts?
Thanks!
Dave
I need to replace the tent frame, but the sizing seems tricky. I know it's based on a bimini top but the frame is much larger than the sizes I can see, and the frame pieces are separate rather than linked together.
Can any of you point me to replacement tent frame parts?
Thanks!
Dave
i can probably take some measurements and snap some photos of mine tomorrow
Similar threads
