XJLI
Adventurer
I know it sounds high. Sounded high to me too when I looked into it but if you look at your sidewalls, the PSI should be there and it specifically says for max loads it should be at 65 depending on the exact tire you have. So for loads in mid-range, it should probably be somewhere around 45-50 on the freeway with obvious reductions when off-highway.
I adjusted my tires to compensate for this as I had previously been running them at 30PSI. The change was significant with approximately a 10% increase in gas mileage.
Running 45-50PSI is still way to high unless your Jeep weighs 5000lbs loaded with gear.