I need to do some quick research to see how much trouble this would be to swap the box onto a long bed truck frame.. have an ‘89 f250 4wd that this would be perfect for
Funny thing is that I have basically followed Holly Beck since that build. She isn't so nomadic anymore, but still manages to live a very interesting and fulfilling life
The plan on my '93 gmc suburban 2500 is to go with a solid axle swap on the front. After doing the research, it was the cheapest route to get where I wanted and take out the parts that tend to die when lifted. The kit I am using is the one from sky manufacturing
I would check with crawlertech in Denver to get a quote on a complete rebuild of the rear axle. Might consider calling them and running by so they can have a look at it. I have had axles built and rebuilt by them in the past and have never had a failure. They have always treated me fair and...
After replacing the actuator on the front axle, I started having issues with the switch on the side of the transfer case not seeing that I had pulled the handle into 4hi or 4lo.
Quick trip to a pull-a-part junk yard with a set of wire cutters netted me an xtra plug that plugs into the actuator...
Thanks for the info. Manual control is always a preference and I can do the swap myself. The price definitely leaves room in the budget to do it as well as a few other mods I have in mind
I am looking at a 91 hunter that has recently had the 4wd quit working. From what I have found from a little searching is that this is semi normal and it is a viscous coupler. What are my best options for repair? Is there another transfer case option that is a bolt up to the transmission and...
Looking for one of the slide ins that four wheel parts made for the chevy blazers. the closer to Colorado the better. would prefer something with a decent exterior and canvas. the interior will probably end up being modified to suit my purpose
Thanks for the input. I am sitting in Arkansas currently so a little far.
I have everything on hand but the kit to do the SAS which is actually pretty cheap. The front axle is already built including the high steer stuff.
This is my first toy and the smallest vehicle in my stable next to the...
I have a '95 4runner with the wonderful 3.slow that I was all but given. It is a 2wd with a pretty decent body and a good clean interior. I happen to have a chevy 4.3 laying around that was put together for another project that has since gone away so I am planning on dropping the engine into...