Recent content by HotrodSmurf

However you could swap in a solid axle and do work :) but it would still just be a 1/2 ton with beefy axles so it depends on your motivation for the swap, if all you need to be 3/4 ton is the axles than your golden, if you really need a 3/4 for towing, hauling, etc than your better just buying a...

Depending on the year the frames are different. If it's ifs the whole front end its very different and not easily swapped.

I've got a 1994 Chevy K1500 I've replaced the intake silencer with a piece of 4" tubing. Removed the heat riser (stuck closed). Cut the ridges off from around the throttle body bores and smoothed it out. Replaced the PO's god awful E3 spark plugs with some AC Delco stock replacements. Removed...

I grew up hunting in my grandpa's 79 F250, When i was in high school I got a 92 F150 and went adventuring. It's what i was used to, didn't really think I was "offroading". I wanted to get more into offroading and needed more seats so I bought a 00 Grand Cherokee. Hated it. With every fiber of my...

... I don't want to live on this planet anymore. Seriously my generation is a bunch of morons.

That looked an awful lot like a wj driveshaft, and I'm sorry you had to have any contact with that waste of time.

That is the most beautiful thing I've ever seen.

That is the meanest thing anyone could ever do...

Small world! Killer screen name by the way.

That is sexy... gives me motivation to hunt for an axle for my 94.

I am about as cheap as it gets and a redneck to boot. On my Chevy I am using a 2" binder clip and a hair tie as a phone holder, air cleaner modified using a dog food dish and some jb weld, , intake resonator delete using some flex vent and a 4" rubber pvc coupler. On the jeep I had before the...

I dig that swing out! Do you ever have a problem hauling something that you would normally haul with the tailgate down? My wife is really worried about that aspect of the swing out.

I worry that when I need it out in the dirt or snow I won't be able to get to it, it is the lowest bit, and will be more drastically so after a new bumper with a built in receiver up high or put on 285/75's. And I've already dragged/rested on it when I slipped into a wash out. Besides if your...

I decided the spare has to come out from under my chevy, so I'm curious what you guys are doing with yours, specifically in pickups.

Fixed it!