Turn off DSC when you're doing this maneuver. Its the button above your radio. If you're doing the maneuver fast as in turning a corner most likely its ABS being applied to equalize wheel speed. If it doesn't occur when you have DSC off then you have your answer. Do you have larger tires as...
100%. I think thats one of the reasons for sure. Ours was just old and the piston ring had worn down. Leading up to that failure it would be nice to know when your compressor had started overworking and at least prepare for it or address it.
Check it out.
Simple system to let you know when your compressor is on. If its on while you're driving especially for extended periods you know you may have a problem
This would mostly depend on the offset of the wheels but if you're running factory 5x120 you will always be limited to the available rims made to that spec. I haven't seen many of the big wheel manufacturers like KMC, Method, Fuel etc making a 5x120. A BMW or Honda would fit no problem since a...
I have a V8. I’ll be posting a video on my YouTube channels. Search my username on YouTube. I’ll have it up in the next couple of days.
Sent from my iPhone using Tapatalk
agree but we only use the Johnson Rods as a temporary lift. This was done on mine to see approximately what was required to fit on 34" tires. My GF is running 33's on hers but we have SYA spacers on top of her Arnotts so they dont stress the bags too much on extended height. This is the more...
Hey folks.
I did a video that explains exactly what I did to achieve a lift using the above method and no it doesn't mean just adjusting calibrations with a GAP tool.
I would not suggest this method unless you completely understand the EAS AND have a GAP tool or similar that can adjust EAS...