1970 Appleby 3 bed Expo Tent Trailer

[bigtrkltltrl]

I have some family things going on that are forcing me to sell my trailer and rig.
January of 1970 Appleby S/N 9. 3 bed tent trailer made for expo travel. Hard wood flooring installed with interior and exterior LED lighting and a Dual USB charging outlet. Brand new plywood bed platforms painted with "Behr" deck over paint. Dual 7 gallon water carrier. Tongue battery box installed with 12v battery. All exterior trailer lights are LED. Axle is flipped for clearance. Extended tongue 3 feet new tongue jack. Very light trailer less than 750lbs so no registration (taxes)!is needed. Canvas is out getting repaired right now. It is original as far as I know. It is getting new zippers installed and reinforcing panels installed around the pole areas. When I get it back I will take the camper out and add current pictures. Some of these pictures are taken before I took it apart and repaired it. The brand new Max Coupler class 3 hitch "IS" included along with the matching locking pins for both sides. I will include the Thule roof rack with the three grey boxes with the sale.

I had plans to install a tank top heater in the front hole in the camper but never got around to it. There are probably things I missed. Feel free to ask any questions or concerns.

PM me for any questions. I will also put a link in for the build thread.

I am wanting to get $3,000 obo for the trailer. The trailer is located in Provo Utah.

Sent from my iPad using Tapatalk

 

[bigtrkltltrl]

Here is the link for the trailer build.

http://www.expeditionportal.com/for...ent-Trailer-new-to-me/page3?highlight=Appleby


Sent from my iPad using Tapatalk

 

[bigtrkltltrl]

Here is the info on the truck. It is located in Provo Utah also.
The truck is a 1991 3/4 ton suburban with a remand factored engine installed with less than 3k miles on it. It has 37" Cooper STT's installed with a matching spare. No 3rd row seat. Warn premium manual hubs installed custom sliders with bed liner on them. It has a warn winch bumper and I have a freshly rebuilt Ramsey RE12000lb winch with factory remote and remote switch for in the vehicle, I have not installed on it yet that will go with it. I installed a wood platform in the rear to hide the spare tire under. I installed a brand new kenwood radio in it and wired a dual USB charging outlet and a secondary 12v outlet. Has a fire extinguisher installed next to the 4wd lever. I have lots of parts and pieces I was going to install just ran out of time. a York air compressor and composite aviation O2 tank. The body is not great but it is a fun vehicle. The truck shows 233k miles but I just went through the trans case and it was all brand new. This truck was bone stock when I got it. The lift is from ORD shackle reversal with 2" spacers and lift springs in the front. 7 pin trailer harness. I have home made removable mud flaps for it. Any other questions about it please feel free to PM me and I will fwd my number to you. Thanks for looking.
As far as price I am asking $4,000.

Sent from my iPad using Tapatalk

 

[bigtrkltltrl]

Ok everyone My truck and trailer are for sale. 3k for trailer and 4k for the truck. All proceeds will be going to help get my brother a wheelchair accessible vehicle. Both are located in the Provo Utah area. PM or call me for any more pics or info. 801-822-4428. Thanks for looking.



Sent from my iPad using Tapatalk

 

[bigtrkltltrl]

Still for sale. Prices are negotiable. There is more invested than I am asking. If they don't sell I am willing to sell parts that are not installed yet. 801-822-4428


Sent from my iPhone using Tapatalk

 

[bigtrkltltrl]

Price reduction time. $3000 for the truck without the winch. And $2000 for the trailer. Any takers???


Sent from my iPad using Tapatalk

 

[Enigma]

Cool trailer, never seen that before. I'm not in the market but just generally curious. How does the tent store and fold out? Do you have any "interior" shots of the tent and of the inside of the trailer with the tent folded up? How much storage space is available in the trailer with the tent folded up for travelling?

 

[bigtrkltltrl]

I have been trying to help my brother out getting a vehicle but he saw my posts and strongly told me to F off if I thought he would take the money. So I made a deal. I will get his kids out camping with mine. So the truck and trailer made the 2000 mile trip to GA from Utah.


Sent from my iPad using Tapatalk

 

[bigtrkltltrl]

I hated to do it but I didn't want to waste 2000 miles on my good tires. So I put little donuts on it. But the truck made it no problem and the trailer rode inside the Penske. Broke a tail light lens only. Getting it out of the truck seemed like it would be a problem. But it rolled right out on the ramp. Easy as pie.