This is my first thread so y'all might have to bear with me at times. Anyway I was handed down an 01 Sequoia about 4 years ago, when I was 16. As any good 16 year old would, I opted for the cheapest route. So i started with a toytec 3/2 spacer kit, ******** Cepek torque wheels, and some 265/75r16 Matercraft Mastercourser at2's. I had this setup for about 4 years and hated it. The lift made the vehicle wander, the wheels never balanced correctly, and the tires were garbage. I always planned to go back and undo my previous mistakes, and this past summer I finally got my chance to do so. I replaced the front spacers with Bilstein 5100 adjustable struts set to the top setting. I also added a set of Camburg uniball uca's. I went back to my stock wheels with Spidertrax on all 4 corners, and for my tires I chose General Grabber at2's in the 295/75r16 flavor. The ride is 10x better and there is no shake in the wheel or body anymore. Now that these problems have been addressed and fixed I want to continue to build upon a platform that i find generally underrated. I will try to use this thread to document the build as it progresses and trips that I take.