UK4X4
Expedition Leader
2006 Offroad trailer " wife reduced price"
Wife reduced price !!!!
This can be seen complete on my thread under expedition trailers,
On going trailer project
I dug out the fab picks as I was intending to re-make the trailer for my growing family....
when I look at the chassis etc.......the changes and improvements I want too make I'd be throwing more away than re-using , and the wife is giving me crap about the mounting collection of spares and saved odd bits
So who would like to purchase 3/4 my trailer...?
ie the kitchen box, front box and roof tent in the pictures is not included,
but I will include another original condition main box.......
that is identical, just in original condition.
Zero manufacturing full high tensile aluminum container with 10 lid lock downs and pressure valve with full lid seal, top opening.
This is pelican case type sealing system with low weight and superior structure.
34wideX44longX24high"
EX USAF for aircraft cameras
The main frame with ball hitch wiring waterproof LED lights, chains, and extendable leg.
2 rear D tow rings and rear 2" hitch for bike rack etc
axle 2000#
with 5x 4.5 Jeep TJ spacing hubs , jeep aluminum wheels and almost new 30" BFG all terrains.
Wheel track is the same as a jeep/landrover....but the wheels stick out from the arches....I can shorten the axle if required
Clearance height to frame is 23" clearance to hitch is 23".
So a TJ or Disco with 4" lift is just right
Side open carriers, for both sides and twin adjustable height bars for a roof tent or whatever you want canoes etc etc.
main box and frame need paint but has zero rust as its only 1.5 years old since it was built.
Box/side racks/fenders and main racks are all removable, trailer bare
could take 2 dirt bikes for example, or a small ATV, jon boat
front space between box and frame can hold a large cooler and two jerry can's.
So the bad
the box has two broken catch's...Ok but you have another 8....
if you fitted a hinge one side and removed the good ones you'd be complete.
On my original one I just used a piano hinge
The frame is zebra and has a few stone chips....the box is USAF grey.......
Any one interested ?
I was thinking of $ 1,000 as is......edit the wife say's I was drunk, and I can't start playing with a new one till this ones gone.......REDUCED PRICE $ 850
Add paint load up and go exploring !!!!!!
no changing wheels and hubs or sand blasting required
OK side racks and adjustable height rack bars fitted back on, all fittings are zink coated with nylocks, rack height adjusts using pins and holes.
Wife reduced price !!!!
This can be seen complete on my thread under expedition trailers,
On going trailer project
I dug out the fab picks as I was intending to re-make the trailer for my growing family....
when I look at the chassis etc.......the changes and improvements I want too make I'd be throwing more away than re-using , and the wife is giving me crap about the mounting collection of spares and saved odd bits
So who would like to purchase 3/4 my trailer...?
ie the kitchen box, front box and roof tent in the pictures is not included,
but I will include another original condition main box.......
that is identical, just in original condition.
Zero manufacturing full high tensile aluminum container with 10 lid lock downs and pressure valve with full lid seal, top opening.
This is pelican case type sealing system with low weight and superior structure.
34wideX44longX24high"
EX USAF for aircraft cameras
The main frame with ball hitch wiring waterproof LED lights, chains, and extendable leg.
2 rear D tow rings and rear 2" hitch for bike rack etc
axle 2000#
with 5x 4.5 Jeep TJ spacing hubs , jeep aluminum wheels and almost new 30" BFG all terrains.
Wheel track is the same as a jeep/landrover....but the wheels stick out from the arches....I can shorten the axle if required
Clearance height to frame is 23" clearance to hitch is 23".
So a TJ or Disco with 4" lift is just right
Side open carriers, for both sides and twin adjustable height bars for a roof tent or whatever you want canoes etc etc.
main box and frame need paint but has zero rust as its only 1.5 years old since it was built.
Box/side racks/fenders and main racks are all removable, trailer bare
could take 2 dirt bikes for example, or a small ATV, jon boat
front space between box and frame can hold a large cooler and two jerry can's.
So the bad
the box has two broken catch's...Ok but you have another 8....
if you fitted a hinge one side and removed the good ones you'd be complete.
On my original one I just used a piano hinge
The frame is zebra and has a few stone chips....the box is USAF grey.......
Any one interested ?
I was thinking of $ 1,000 as is......edit the wife say's I was drunk, and I can't start playing with a new one till this ones gone.......REDUCED PRICE $ 850
Add paint load up and go exploring !!!!!!
no changing wheels and hubs or sand blasting required
OK side racks and adjustable height rack bars fitted back on, all fittings are zink coated with nylocks, rack height adjusts using pins and holes.
Last edited:
