2011 So-Cal Teardrops Krawler 459 ***SOLD***

Mr. King

Undecided



I have our 2011 So-Cal Teardrops Krawler 459 for sale. $16,500. I have title in hand.

It's ready for you to enjoy some first class comfort and capability.

This is THE off road teardrop that all others are judged by. Hand built in Upland, CA, the quality, fit and finish are second to none!

This trailer is in superb condition with a recent bearing repack, brake inspection and a good cleaning. All seals are recently conditioned and perfect with no tears or leaks. All systems work as advertised. She has always been stored inside. It's been enjoyed but not abused.

It even still has that new teardrop smell!

Our needs are changing and we aren't able to get away and enjoy it like we should. We love this trailer but, I would rather see her out and about than tucked in the corner of the garage waiting for an adventure.

Located in Bedford, Texas.

I will include a rebuildable set of Toyota compatible 6 lug hubs on request.

Specs: From So-Cal Teardrops
Frame - 2” x 3” .120 Wall Steel Tubing
Old Man Emu Leaf Springs
3000 lb. Axle w/ 10” Electric Brakes
Rancho RS9000XL Adjustable Shocks
Reinforced Cabin Structure
4” Thick Mattress
AM/FM/CD Radio
Interior Cubbies, Shelves and Cup Holders
2 Burner Propane Stove Mounted in a Sliding Drawer
Nested Utensil Drawer
3 Stage Marine Battery Charger
5 on 5” Lug Pattern

Included Factory Options:
Kitchen Upgrade
SCT Fridge Slide
Mounted 5 lb. LP Tank
19 Gallon Water Tank and Pump System
6” Powered Roof Vent
Cabin Drawers
Curtain Rods and Curtains
Extended Tongue
Porch Lights
Max Coupler
Side Aux. Receivers
Group 31M, Die Hard Platinum AGM Battery
Interior Mac’s Tie Downs and Fittings

Owner Added:
ARB 50 liter Fridge.
SCT Factory Recommended Cabin Door Stiffener Mod.

Galley Passthrough Cover
Extra Large Tongue Box
Blue Sea Fuse Panel
So-Cal Junk Drawers w/ Custom Retainers
33” Falken Rocky Mountain Tires on Aluminum Wheels (90%)
2 Full Sets of Sheets
2 Pillows
2 Rear Stabilizers

Known Problems/Damage:
Minor Stone Impacts on Cabin Door Hinges/Fenders (normal)
Small Bend in Water Tank Skid Plate
Water Sprayer Button Pivot Loose
Slight Tear in Mattress Cover
Ding inside hatch near the top left from being closed on a pot.


Images:

3b1f660e-1e80-43ef-a736-1c9a5fcf0d16_zpsd17dd20c.jpg


IMG_4848_zps497ecb9a.jpg


IMG_4840_zpsa6b84a4c.jpg


IMG_4812_zps3276a340.jpg


IMG_4806_zps04e65370.jpg


Full slide show here- Clicky

Please give me a shout if you want specific images or have any questions.

Thanks, Mr, King
 
Last edited:

fireball

Explorer
Do both side doors have screens in the windows? How does that work with the power roof vent? Keep it decently cool in there?

Can you show more about the water tank? Thanks!
 

Mr. King

Undecided
Hi Fireball,

Yes, both doors are screened. With the windows open and the fan going you can definitely feel the air move. It comes though the screens onto your upper body.

I'll post some images of the water tank this evening. I'm guessing you want to see the bend in the skid. I'll shoot that and some general overview images, too.

Thanks for reaching out!

Mr. King
 

fireball

Explorer
Is the water tank just run to the spigot/connection on the passenger side of the back of the teardrop?

Also, do you know the open height of the rear arm? i.e. when the rear hatch is open all the way, how tall can I be without hitting my head on it?

Thanks!
 

Mr. King

Undecided
Is the water tank just run to the spigot/connection on the passenger side of the back of the teardrop?

Also, do you know the open height of the rear arm? i.e. when the rear hatch is open all the way, how tall can I be without hitting my head on it?

Thanks!

Hi Fireball,

I measured the open hatch at 6'11" at the lowest point.

Yes, the water tank simply runs the connection on the side. The connector is a mixer valve and will accept a hot water line should you decide to install a heater.

Here are the detail images...

Right rear corner of water tank skid.
IMG_4888_zps5e70e365.jpg


Left rear corner of water tank skid.
IMG_4896_zpsf02bbf6b.jpg


Spray nozzle and hose connected to the mixer. Everything works as advertised.
IMG_4906_zpsce8fc1cb.jpg


Sprayer nozzle. I was having a hard time spending $100. on something a tie-wrap would manage. I have been looking for a compatible replacement sprayer.
IMG_4901_zps2d129769.jpg


Drain plug. There are a few more in the drawer as the wrench flats (head) seem to wear pretty quickly.
IMG_4894_zps34c5fd5b.jpg


Mr. King
 
Last edited:

Forum statistics

Threads
186,158
Messages
2,882,612
Members
225,984
Latest member
taunger
Top