Yeah right now I’d only need to pull the TC.
Here's my cheap tip for the installation.
Your gonna fashion 2 alignment dowels from a pair of bolts that you can access with a screwdriver.
Insure they are of adequate length to allow the TC to slide into place.
Cut off the bolt heads,,
Grind a tapered point,,
Cut a slot in the point to fit
the screwdriver.
Insert in 2 easily accessible bolt holes just a few threads.
Install the TC and the remaining bolts.
When tight,, remove the alignment dowels and replace the 2 final bolts.
Wham, Bam, thank you Ma'am!
Definitely a two person job
w/ the jack.
Works for Engines and transmissions also.
Your welcome
. G.
Sent from my SM-G970U using Tapatalk